BeamWatch® Integrated

BeamWatch Integrated ist ein vollständig automatisiertes System zur Lasermessung, das entwickelt wurde, um die Messung kritischer Laserstrahl-Parameter direkt in industrielle Fertigungslinien zu integrieren. BeamWatch Integrated basiert auf dem patentierten, berührungslosen BeamWatch Prinzip und misst alle entscheidenden Strahlparameter in Echtzeit.
Darüber hinaus liefert ein integrierter Leistungssensor die absolute Laserleistung.
BeamWatch Integrated misst alle relevanten Laserstrahlparameter eines fokussierten Strahls bis zu 10 kW Leistung (30 kW auf Anfrage). Die gemessenen Parameter beinhalten:
-
Fokusdurchmesser und Fokuslage
-
Fokusschwankung
-
Schwerpunkt
-
M2 oder K
-
Divergenz
-
Strahlparameterprodukt
-
Rayleighlänge
-
Strahlneigungswinkel
-
Absolute Leistung
-
Vollständig automatisierter Betrieb
-
Trendanalyse mit gut/schlecht Signal
-
Detaillierter Bericht mit Zeitstempel
-
Arbeitet mit unterschiedlichen Schweißkopf-Typen ohne eine Änderung des Messsystems
-
Industrielle Schnittstellen, die zusätzlich zu GigE gewählt werden können: PROFINET, EtherNet/IP und CC-Link
-
Robuste Konstruktion für industrielle Fertigungsumgebungen
-
Kurze Messzeiten für regelmäßige Messungen bei Schichtbetrieb
-
Es sind zwei Optionen für Single- oder Multimode-Laser verfügbar
Cameras
|
Beam Profiling | ||
Wavelength | 980 - 1080 nm | |
Waist width accuracy | ±5 % | |
Waist location accuracy | ±125 µm within the BeamWatch window | |
Camera field of view inside the unit | 32.17 mm x 8.55 mm | |
Maximum entrance/exit beam diameter | 12.5 mm | |
Focal shift accuracy | ±50 µm | |
BPP accuracy | ±3.5 % RMS | |
Divergence accuracy | ±3.5 % RMS | |
M² accuracy | ±3.5 % RMS | |
Particulate purge | Clean dry gas (Air, Nitrogen, Argon), ~5-10 L/min, 6 bar | |
Power Meter | ||
Power range | 500 W - 9999 W (up to 30 kW on request) | |
Maximum power density at power meter(1) | Beam diameter | Max power density |
< 15 mm | 10 kW/cm² | |
15 - 20 mm | 7 kW/cm² | |
20 - 40 mm | 5 kW/cm² | |
40 - 45 mm | 4 kW/cm² | |
Power sensor response time | 2.7 s max for 9999 W (quicker for less power) | |
Backscattered power | < 1 % | |
Power noise level | 25 W | |
Linearity with power | ±2 % | |
Power accuracy | ±5 % | |
Software | ||
BeamWatch Integrated software | PROFINET/ EtherNet/IP/ CC-Link | |
Webinterface or BeamWatch Software | ||
Output | OK/Warning/NOK values, CSV, PDF and BeamWatch files | |
Calibration Certificates | ||
Power Sensor | NIST traceable | |
Camera | Certification | |
General | ||
Communication (addition to GigE) | PROFINET/ EtherNet/IP/ CC-Link | |
Distance between focus and power meter | 150-175 mm or 500 mm | |
Power supply | 24 Volts DC, 5 Amps max | |
Water cooling(2) | Clean non-corrosive water, 8 L/min, 18-30 °C, 6 bar, ~2 bar pressure drop | |
Weight | ~20 kg | |
Dimensions | 21.78 in x 12.48 in x 6.78 in / 21.78 in x 26.87 in x 6.78 in | |
553 mm x 317 mm x 172 mm / 553 mm x 682 mm x 172 mm | ||
Compliance | CE, UKCA, China RoHS | |
(1) For circular beam centered within ¼ of beam diameter. IMPROPERLY CENTERED BEAM CAN CAUSE DAMAGE TO SENSOR. Maximum tilt angle on power sensor ±5 degrees. For rectangular beam please consult MKS Ophir representative | ||
(2) Water temperature rate of change <1ºC/min. The recommended flow rate can be lowered proportionately at lower than full power but should not be below 3 liter/min. The response time will be optimum with the recommended flow rate. |
Documentation
Beamwatch Integrated User Note
Beamwatch Integrated User Note German
BeamWatch User Guide
BeamWatch User Guide German
Beam Profilers Catalog
Detect Issues Within Seconds. Reduce Rejects. Ensure Safety.
Efficiently measuring high power lasers in industrial applications
Hochleistungslaser effizient messen
BeamWatch Integrated
The system can be manually operated by PC using BeamWatch, our full-function software with an extensive set of ISO quantitative propagation measurements, NIST calibrated power measurements, graphical representations of the beam caustic. Requires user supplied PC.
The system can alternatively be operated automatically by PLC using PROFINET, EtherNet/IP or CC-Link. Tolerances and limit values can be set-up for desired measured parameters to trigger corrective actions. The trend charts give insights for early problem detection and predictive maintenance.
In both cases PDF and CSV reports can be generated.PROFINET Installation: GSDML File
To install the BeamWatch Integrated into a PROFINET network, download the GSDML file and follow the instructions in the manual