SP1203 ビームプロファイラー
SP1203カメラは波長帯域900nm - 1700nmの波長を正確に捕捉・分析します。高分解能VGAセンサー、コンパクト設計、PoE、ファン不使用の安定的なセンサー冷却、および自動NUCファイル修正を特長としています。このInGaAsカメラ方式のビームプロファイル測定システムは、アイセーフな軍事利用、通信、医療用レーザープリケーションに最適です。
-有効ピクセル数 640 x 512、ピクセルサイズ15μm
- NIR(近赤外線帯域)パフォーマンス
- コンパクトな工業用デザイン
- PoE
- 自動NUCファイル修正
- ISO適合精度を導くOphir独自のUltracal補正機能
- BeamGageソフトウェア プロフェッショナル版付属
仕様
- 900-1700nm
- 150μm – 7.4mm
- GigE
- InGaAs
- CW, Pulsed
- 9.6mm x 7.6mm
- 640 x 512
- 15μm
- 68 dB
- 60Hz
- CE, UKCA, China RoHS
製品概要
SP1203 InGaAs高分解能カメラについては下記バージョンのソフトウェアを提供しています。
-
BGP-GigE-SP1203
SP90524CマウントフランジバックInGaAsカメラ、有効ピクセル数:640 x 512ピクセル、波長範囲:0.9〜1.7μm
注意事項:このカメラの使用に際してはSP1203キット(P/N SP90536、下記参照)が必要となります。 -
SP1203 キット
SP90536SP1203カメラ用キット:BeamGage プロフェッショナルソフトウェア、ソフトウェアライセンス、Gigbit Erthernet- USB 3.0変換アダプタ、CAT6 Ethernetケーブル、電源・トリガーケーブル、電源ケーブル、NDフィルター3個付属
御見積り -
BeamGage トレーニングDVD
SP90429
Documentions
BeamGageプロフェッショナル版
レーザビーム解析用BeamGageビームゲージソフトウェア・プロフェッショナル版は、スタンダード版の機能に追加機能が含まれています。全てのカメラに対応、ウインドウが仕切られて表示されるので1台のカメラでマルチビーム解析に対応、ユーザのアプリケーションに最適化できるよう.NETオートメーションインターフェースに対応しています。
図面
FAQ
What is the distance from the front of the camera to the sensor?
We call this term a "CCD recess". Ophir provides differen Beam Profiler cameras designated for varies uses , thus there are 2 types CCD recess: Most models has 4.5mm CCD recess. Some models have standard C-mount camera has a sensor depth from the front of the camera to the sensor of 17.5mm. Some outdated Ophir beam profilers had 12.5mm recess.
閉じるWhat is the saturation level of the SP1203 camera?
The saturation intensity for the SP1203 is 8.9µW/cm2 at 1550nm
Follow this link and input your laser parameters and you can calculate the your power density.
What is the framerate of the SP1203?
60 Frames/second
The effective frame rates listed in BeamGage specification sheets are the maximum rates typically achievable in actual use. Frame buffering, image processing techniques, graphical displays, and mathematical computation all add degrees of overhead to achieving higher frame rates. This can be further limited by the available PC hardware. BeamGage features two modes, Frame Priority and Results Priority, which change how the system balances the work. Results Priority acquires a frame, performs any enabled image processing, performs all calculations and updates the graphical displays before accepting another frame from the camera. This mode is most useful when a temporal sequence of frames is not necessary and should always be enabled when logging. Frame Priority mode will allow the calculations and graphical display updates to be interrupted if another frame is ready from the camera before those operations are complete. This can be useful when collecting all frames at the maximum camera frame rate is necessary.
What beam sizes can I measure with the SP1203?
150μm - 7.4mm
The accurate beam size minimum is derived by the pixel size of the camera. In order to get an accurate measurement, there must be enough coverage of pixels to ensure that illuminating another pixel will not over exaggerate the beam size.
Follow this link to find out more.
動画

レーザ計測&ビームプロファイルの基礎についての説明です。

カメラベースのビームプロファイラシステムのセットアップ方法を工業用シングルパルスレーザ溶接システムを例にご紹介します。

BeamMaker helps engineers, technicians, and researchers understand a beam's modal content by subtracting theoretically generated modes from real beam measurement data. Derive a perfect beam profile by specifying the mode, size, width, height, intensity, angle, and noise content - then comparing it to theoretically derived measurements. The end result is knowledge about how much the real beam varies from the desired beam.
Watch the BeamGage Tutuorials, including tips on handling your CCD camera, software install, introduction to the BeamGage user interface, the context-sensitive help system and user manual, customizing your reporting environment, and configuring BeamGage to display specific laser measurements.
Support
同一条件での比較:レーザビームアプリケーションに最適なカメラ技術はどれですか?
レーダーガン/LIDAR
BeamGageビームゲージ・プロフェッショナル版でのマルチビーム計測
Using the built in photodiode trigger on the SP620U and SP503U cameras.
アクセサリ
-
オプティカル カメラトリガーはトリガ機能オプションで、カメラ本体に設定して外部オプティカルトリガーでパルスに同期します。 オプティカル カメラトリガーシステムの構成はオプティカル カメラトリガー本体とオプションのC-マウントアダプター