Laser Measurement

Video

Fiber Optic Adapters for Ophir Sensors

Need to measure a laser beam coming out of a fiber? To do it right, the fiber will need to be suitably positioned in front of the sensor, and held steady. Learn about fiber adapters …

Video

Auto Range: Issues to Be Aware of

Laser power meters have a wide dynamic range typically divided into several scales or “ranges”.

Video

Product Feature: 3A-IS Integrating Sphere Sensor

Measuring a widely diverging, low power beam (think of laser diodes, fibers, etc.) can be challenging. The 3A-IS family of Integrating Sphere Sensors can help you fully capture and …

Video

Measuring low power, slowly pulsing beams: “Low Frequency Power”

Are you trying to measure a low-power, slowly pulsing beam (think of a VCSEL beam for example) – and getting frustrated? Measuring low-power, slowly pulsing beams using photodiode sensors …

Video

Certificate of Calibration (C.O.C.) Explained

The Certificate of Calibration (C.O.C.) certifies that your Ophir instrument meets all its specifications. It tells you – quantitatively - exactly how accurate your Ophir measurement …

Video

Juno-RS: The New RS232-based Virtual Meter

If you need to connect your laser power or energy sensors to an automation system – or to a PC – using RS232 communication, the new Juno-RS Virtual Meter from Ophir may be just the …

Video

Product Feature: Ariel – Great Instrument, Now Even Better

The Ophir Ariel – a palm-sized, robust laser power meter for high power industrial applications – has just been made even better! Check it out in this video.

Video

Part 9 - Using the Centauri Meter: Measuring High Power Using Short Exposure (Pulsed Power Mode)

This short video will help you learn to use the Centauri power meter for measuring high power lasers using the pulsed power mode.

Video

Part 2 - Using the Centauri Meter: Functions and Graphical Display Options

This short video will help you learn to use the functions and graphical display of the Centauri, Ophir's new advanced touch-screen laser power and energy meter.

Video

Juno+ A New Virtual Laser Power Meter On Your PC

The new Ophir Juno+ enables you to connect your Ophir “Smart Sensor” to your PC via USB. Your PC then becomes a full-featured laser power meter, either running Ophir’s StarLab software …

Video

Pulse Characterization with Fast Photodetectors

Using these Ophir fast photodetectors, you can see and measure the temporal characteristics of pulsed and CW laser beams.

Video

Centauri: A New Experience in Laser Measurements

The Centauri is the most feature rich desktop laser power/energy meter on the market. Just plug in one of the many Ophir sensors and you have a whole measurement laboratory at your …

Video

Measuring IPL Pulses with the L40(150)A-IPL Sensor

Meet Ophir’s new sensor specifically designed for measuring IPL pulses: L40(150)A-IPL. In this video, you’ll learn how this sensor can help you overcome the 4 main challenges for correctly …

Video

RM9-PD Radiometer System: Powers Down to Femtowatts!

The RM9-PD system measures powers all the way down to 300 fW. This video introduces you to the RM9-PD, and shows you how to use it.

Video

Part 3 - Using the Centauri Meter: Thermal Sensors

This short video will help you learn to use the functions and graphical display of the Centauri, Ophir's new advanced touch-screen laser power and energy meter.

Video

Part 7 - Using the Centauri Meter: Data Logging

This series of short videos will help you learn to use the Centauri, Ophir's New Advanced Touch-Screen Laser Power Meter.

Video

Photodiode Sensors for measuring very low laser powers

In this short "Basics" video, we review in general the use of photodiode sensors for measuring very low laser powers.

Video

Sensors for Measuring Laser Power

In this short "Basics" video we review in general how one goes about measuring laser beam power, so that you'll have a clear understanding of what the different sensor types are, and …

Video

FAQ: Does damage threshold depend on power level?

Does Power Density damage threshold really change with Power? Shouldn’t it remain the same throughout the whole Power range? In this video you’ll learn why the specified damage threshold …

Video

Laser Measurement Solutions for Materials Micro processing Applications

Webinar produced by Photonics Media and presented by Mark Slutzki, Product Manager at Ophir Photonics on June 2022 Those who use lasers in materials micro processing applications — …

Page 1 of 4
Contact Us illustration

Have questions? Require assistance?

Click below to to contact Ophir Photonics and we'll get back with you shortly.

Contact Ophir Photonics