Laser Beam Analysis Resources

The Optical Camera Trigger is an optical sensor that detects pulsed light sources and generates an output to trigger a camera or similar device. It provides two types of outputs – TTL …

BeamGage is a low cost, PC-based product for use in modern multi-core advanced Pentium-generation personal computers running Windows 7 or Windows 10 operating systems.

The Pyrocam IIIHR is a high performance, solid-state, pyroelectric camera that features a 12mm imager (160 x 160 pixels) and 16-bit A/D converter. This enables reliable measurement …

The Pyrocam IV is a high performance, solid-state, pyroelectric camera that features a large 25mm imager (320 x 320 pixels) and 16-bit A/D converter. This enables reliable measurement …

The Ophir-Spiricon, LLC Laser Beam Analyzer, BeamMic is a low cost, PC-based product for use in modern multi core advanced Pentium-generation personal computers running the Windows …

NanoScan2 is a PC-based instrument for the measurement and analysis of optical beam spatial profiles in accordance with ISO standards. Beam profiles are measured in accordance with …

BeamWatch is the laser industry’s first completely non-interfering beam monitoring system, which allows beam measurements without contacting the laser beam. Measurements are taken by …

The BeamWatch software interfaces with the BeamWatch family of products. BeamWatch enables users to see beam data collection in real time. Due to the real time nature users can see …

Center the beam in the BeamWatch Apertures. • The center of the entrance aperture is located 50mm from the crosshair mark on the top of the unit.

BeamWatch Integrated combines a non-contact beam profiler with a power sensor. The water cooling plate under the beam profiler maintains acceptable temperatures. The cooling plate also …

BeamWatch AM is the next version in Ophir-Spiricon’s family of non-interfering beam monitoring systems. Designed specifically for the additive manufacturing industry, BeamWatch AM …

Connect the data, power sensor cables, and the polyurethane tubing to their respective ports on the BeamWatch AM unit.

BeamCheckTM is a camera-based laser beam profiling system for SLS/SLM 3-D Additive Manufacturing systems. BeamCheck measures and produces a beam profile of the laser beam focused at …

It is recommended that users review this guide before setting up and using the BeamSquared system. This guide will assist users in becoming familiar with the M2 measurement theory as …

NanoModeScan is an accessory to the NanoScan family of laser beam profilers. It is a computer driven automated linear stage and data acquisition and analysis system. It is designed …

Variable Attenuator for C-mount Cameras P/N SPZ17012 User Notes

Goniometric Radiometer Models LD 8900™ and LD 8900R™ Installation and Operation Manual

High Power NanoScan Addendum to NanoScan v2™ Installation And Operation Manual

This document only applies to computers running either both Windows 7 which will be running a Pyrocam III in either the Pyrocam Control Console or BeamGage.

1X UV Image Converter P/N SPZ17023 With Optional Beam Splitter P/N SPZ17015 User Notes