Compare Model Drawings, CAD & Specs Diameter Edge Thickness Coating Type OEM Compatibility Availability Price
1.0 in. 3.0 mm ZPS
1.75 in. 5.08 mm ZPS
1.75 in. 9.52 mm ZPS Mazak
2.0 in. 10.16 mm ZPS Trumpf
2.67 in. 20.32 mm ZPS Trumpf
1.5 in. 4.0 mm ZPS-HR
2.0 in. 9.52 mm ZPS
3.0 in. 6.35 mm ZPS Amada
2.0 in. 5.08 mm ZPS Amada
3.0 in. 9.52 mm ZPS
2.5 in. 6.35 mm ZPS N -Tanaka


  • Type
    Zero Phase Shift Mirror
  • Optic Material
    Silicon (Si)
  • Angle of Incidence
  • S1 Radius
  • S2 Radius
  • Phase Shift Tolerance
    0º ±2º
  • Surface Quality
    10-5 scratch and dig
  • Surface Irregularity
    1 Fringes @ 633 nm
  • Power
    2 Fringes @ 633 nm
  • Diameter Tolerance
    +0 / -0.12 mm
  • Thickness Tolerance
    ±0.25 mm
  • Wedge
    <3' (arc minutes)


Zero Phase Shift Mirrors

In most laser machines, one or several mirrors are used to forward the laser beam from the cavity to the working head. Usually, each mirror deflects the laser beam at an angle of 90°, corresponding to an angle of incidence of 45°. At these mirrors, reflectance should be as high as possible in order to minimize loss of laser power. In addition, phase shift between the s- and p-polarized components of the reflected beam should be as low as possible in order to avoid disturbing the polarization of the laser beam. Mirrors with such properties are called zero-phase mirrors

Zero Phase Shift Mirror Coatings

The optical properties of a mirror (reflectance, phase shift, etc.) are determined by its coating. In order to realize different mirror functions, different coatings are needed.

The new Zero Phase Shift High Reflection (ZPS-HR) coating features lower absorption by 40% compared to standard ZPS/TRZ coating. Maximum absorption of the ZPS-HR version coating is 0.3%, an improvement to the standard ZPS absorption level of 0.5%.

MMR-P coating can be used for zero phase shift mirror or cavity optics, and allows for the highest total random polarization reflection available. It can also be applied to a level-changing mirror in two-tiered resonator systems. Our MMR-P coating keeps the same capabilities of phase shift and high reflection of visible light to enable clear observation of HeNe laser or diode laser beam reflection for alignment, location indication, etc.

Coating Substrate %R@45°@10.6 %S-Pol@45°@10.6 %P-Pol@45°@10.6 %R@45° Phase Shift@45°
ZPS Si&Cu 99.5% - - ≥80%@630-670 nm 0°±2°
ZPS-HR Si 99.7% 99.8% 99.6% ≥80%@630-670 nm 0°±2°
MMR-P Si&Cu ≥55%@900-1000 nm 0°±2°

Contact Us illustration

Have questions? Require assistance?

Click below to to contact Ophir Laser Optics and we'll get back with you shortly.

Contact Ophir Laser Optics