2件中2件の商品を表示
比較 モデル 図面、CAD、仕様 在庫状況 価格
SupIR 25 mm f/1.0 マニュアル 単焦点LWIR XGA イメージング レンズ680319-001SupIR 25mm f/1.0LWIR 単焦点マニュアルフォーカスレンズ、SupIR、焦点距離25mm、f/1.0、HDコート、HDフォーマット
SupIR 25 mm f/1.0 マニュアル 単焦点LWIR XGA イメージング レンズ680319-002SupIR 25mm f/1.0LWIR 単焦点マニュアルフォーカスレンズ、SupIR、焦点距離25mm、f/1.0、HCコート、HDフォーマット

HFOV [deg]

Format
Pitch 320x240 384x288 640x480 1024x768
17 µm 12.4° 14.8° 24.4°
12 µm 8.8° 10.5° 17.4° 27.4°

仕様

  • タイプ
    Single Field of View
  • 焦点距離
    25 mm
  • F/#
    1.0
  • 波長範囲
    8-12 μm
  • 背面焦点距離
    13.46 mm in air
  • フォーカスメカニズム
    Manual
  • フォーカス範囲
    1 m to infinity
  • 被写界深度
    16 m to infinity
  • 動作温度範囲
    -40°C to +70°C
  • 保管温度範囲
    -50°C to +80°C
  • シーリング
    IP 67 front element only
  • 波長領域
    LWIR

機能

SupIR 25 mm f/1.0 Detection, Recognition & Identification (DRI) Range

* Assumptions: 50mK NETD (f/1.0) for LWIR uncooled detectors | 30Hz frame rate | 50% detection probability | 0.2km-1 atmospheric attenuation coefficient | human ΔT = 5°C | vehicle ΔT = 2°C

DRI ranges enable one to easily estimate the maximum range that an object can be either detected, recognized or identified. It is important to note that these estimates are based solely on geometrical parameters – the target size, distance, lens focal length and camera detector pixel size. Signal level, detector sensitivity, atmospheric conditions and other factors are not considered!

The calculations used here are based on the “Johnson Criteria”. According to the Johnson Criteria, the minimum resolution, pixels on target, required to achieve a 50% probability for an observer to discriminate an object are:

  • Detection: An object is present – 2 pixels on target (Lower Bar)
  • Recognition: discern the type of object, a human vs. a vehicle – 8 pixels on target (Middle Bar)
  • Identification: discern specific objects, a man vs. a woman, a car model – 12.8 pixels on target (Upper Bar)

IRオプティクス製造現場のバーチャル ツアー

光学コーティング

Ophirの耐摩耗性に優れた反射防止 (AR) コーティングには、最大の耐久性とエネルギー透過率を与え、反射を最小限に抑える数種類のDLCコーティングが含まれます。

  • 物理蒸着法 (PVD) – 加熱と電子ガン
  • イオンアシスト蒸着法 (IAD) – イオンガン
  • プラズマCVD (PECVD) – DLCコーティング向け

パッシブ アサーマル レンズ アセンブリー

当社の IR イメージングレンズ アセンブリーは、レンズとオプトメカニカルシステムのパッシブアサーマル化を組み込み、動作温度範囲全体で最高のイメージング性能を維持します。 独自の断熱特性を可能にする高度な素材と、幅広い温度範囲で光学的変動を効果的に補正するオプトメカニカル設計を使用しています。

高性能長波長焦点面

先進的な技術、最高品質の材料、独自のコーティング技術、革新的なエンジニアリングと光学機械設計を駆使して作られたOphirの製品は、優れた性能、耐久性、品質で高い評価を得ています。

リソース

データシート

図面&CAD