EA-1 以太网适配器
EA-1 以太网适配器
EA-1以太网适配器可将您的传感器变为一台以太网激光功率计。
- 从传感器直接到以太网，无需PC连接
- 功率直接来自以太网总线
- 支持热电堆和光电二极管智能传感器
- 包含PC应用软件包
- 通过远程登录或HTTP协议可实现远程监控 查看所有功能
Software
PC Software & Drivers
This section describes various ways to interface the Ophir meter to your PC as well as the software options available. Check out the datasheet for more details.
The StarLab application together with an Ophir meter turns your PC or laptop into a full-fledged laser power/energy meter. Supports most Ophir laser power/energy sensors. Up to 8 sensors can be displayed at once on one PC. Supports the Ariel, Centauri, StarBright, StarLite, Juno, Juno+, Juno-RS, Nova II, Vega, Pulsar-1/2/4, Quasar, EA-1 and Ariel devices.
OphirEthernetApp PC Application
Adapter for monitoring Ophir sensors via Ethernet
Embedded Software for EA-1 Ethernet Adapter
Use OphirEthernetApp to upgrade the firmware of your device. Follow the step-by-step instructions (see link above).
规格
- 产品名称EA-1
- 热传感器兼容性Yes
- 光电二极管传感器兼容性Yes
- 热释电传感器兼容性Yes
- 光束跟踪传感器的兼容性Yes
- 统计Yes
- 模拟输出No
- 电源Via Ethernet or included Power Supply
- 以太网Yes
- USBYes
- 板载数据存储No
- 自动化接口Yes
- Labview VI'sNo
- CE 符合性Yes
- UKCA 符合性Yes
- 中国 RoHS 符合性Yes
功能
Product Feature: EA-1 Ethernet Adapter
The EA-1 Ethernet adapter enables you to connect an Ophir “Smart Sensor” to your Ethernet network. In this video, you’ll get an overview of how you can integrate the EA-1 into your system, and use it to monitor and control your laser sensor remotely.
Introduction to the StarLab Laser Measurement Application
This video gives an overview of the StarLab application and its various functions. Part 1 of a series of video segments teaching you how to use StarLab.
Laser Measurement PC Interfaces
If all your laser measurement work involves a laptop or a PC, rather than a stand-alone meter, one of Ophir's direct-to-PC interfaces could be an ideal solution. These are full-fledged Laser Power and Energy meters, but instead of having a separate on-board display, the PC becomes your display. In this video you will learn about the range of PC Interfaces available from Ophir.
Ophir Laser Measurement Virtual Meters
If all your laser measurement work involves a laptop or a PC, one of Ophir's direct-to-PC virtual meters could be an ideal solution. These are full-fledged Laser Power and Energy meters, and - together with the sensor and Ophir’s powerful StarLab software application - turn your PC into a full-function, multi-channel laser measurement workstation.
In this webinar, you will learn about the range of virtual meters and interface options available from Ophir.
常见问题
- How is the EA-1 Ethernet Adapter powered?答案
The EA-1 can be powered directly from the Ethernet bus if PoE (Power over Ethernet) is available. If not, it can use a 12 24 VDC standard Ophir power supply.
- What is included in the box with the EA-1?答案
Besides the Ethernet Adapter itself, the package also includes:
- Ethernet cross cable
- USB-A to USB-Mini-B
- 12 VDC power supply
- CD (for PC application, manual, and drivers for using USB virtual COM port)
- Brackets, screws, and an Allen wrench for mounting
- How can I control the sensor via the EA-1 device?答案
There are three ways to connect to the EA-1 adapter:
- Telnet: Establish a connection using the IP address of the EA-1. The host (e.g., PC) is considered the “client,” while the EA-1 is the “server.”
- HTTP: The IP address of the EA-1 should be entered into a regular web browser. This will show a top-level “web-page” with several buttons for accessing lower level pages. Commands can also be sent directly with the HTTP protocol. Client and server status are the same as above (Telnet).
- USB virtual COM port: For configuration and initialization only. This can be used to set the IP address for the first time or switch between dynamic and static IP address modes.
More details can be found in the EA-1 manual.
- Can I write my own software to work with EA-1 Adapter?答案
Yes. See chapter 6 of the manual.
- How do I set the IP address of the EA-1 Ethernet Adapter?答案
The device is shipped with these defaults:
- IP Address ....................................10.0.0.2
- Subnet Mask .................................255.255.255.0
- Default Gateway ............................10.0.0.1
- User Device Name .........................(blank)
- IP Address allocation ......................static (DHCP disabled)
The IP address can be set via HTTP, Telnet, USB virtual COM port, or the “OphirEthernetApp” software. See Chapter 2 of the manual for step-by-step instructions for each method.
- What sensors does the EA-1 Ethernet Adapter work with?答案
Thermal, photodiode, and BeamTrack (power/position/size) sensors\
- Do I need to recalibrate my instrument? How often must it be recalibrated?答案
Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.
- I need to embed the EA-1 Adapter into my laser system. Can it be controlled from a PLC?答案
Yes it can. You can find a good set of guidelines in the following article: Tips using the EA-1 with a PLC. Complete instructions can of course be found in the EA-1 User Manual.
- What is Ophir Statement of Volatility of Memory for EA1- Ethernet Adapter?
答案
配件
N Polarity Power Supply/Charger
Power Supply/Charger for Centauri, Vega, Nova II, LaserStar, Nova, EA-1, Pulsar, Quasar, 6K-W, 120K-W, 150K-W and fan cooled sensors.
| 对比 | 型号 | 图纸、CAD和参数 | 库存 | 价格 | ||
|---|---|---|---|---|---|---|
 | 7E05029DC Power Supply / Charger, N Polarity |
Cables
1 Unit of each cable is included with EA-1.
Extended Warranty for Sensor
Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
| 对比 | 型号 | 图纸、CAD和参数 | 库存 | 价格 | ||
|---|---|---|---|---|---|---|
 | XWAR-SENSORExtended Warranty for Sensor |
资源
Data Sheets
EA-1 Datasheet(655.6 kB, PDF)
Drawings & CAD
EA-1 Drawing(253.8 kB, PDF)
Manuals
EA-1 User Manual(2.5 MB, PDF) StarLab User Manual(5.5 MB, PDF)
Catalogs
PC Interface Meter Brochure(562.3 kB, PDF) Power/Energy Meter Catalog(25.5 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF) Power Meters Catalog(6.5 MB, PDF)
Technical Notes
Tips using the EA-1 with a PLC(1.7 MB, PDF) 5 Situations Where Laser Performance Measurement is Necessary How do I know what range, or scale, to set my power/energy meter to?
Technical Articles
Battle Axe vs. Scalpel: How to Work with High Power Density Lasers Going Digital in Manufacturing Main Memory Volatility Statement for EA-1(205.1 kB, PDF) Ophir Power/Energy Meter Calibration Procedure and Traceability/Error Analysis Laser Measurements in Materials Processing Power and Energy Meters: From Sensors to PC
Application Notes
Software
StarLab.zip(119 MB, ZIP) OphirEthernetApp.zip(2.9 MB, ZIP) EA-1 Firmware Version 1.18(216 kB, BIN)
