Compact LWIR Zoom Lens for SXGA 10-12µm Uncooled Detectors
Optimized for next-generation SXGA 1280×1024 uncooled LWIR detectors, the SupIR 16-80mm f/1.2 delivers high-definition thermal imaging in a compact, lightweight design with a detection range exceeding 8km. Ideal for UAVs, ISR payloads, and surveillance systems, it features line-of-sight (LOS) stabilization, high MTF for superior thermal contrast, and rugged coatings for durability in harsh environments.
Key features:
- Advanced technologies for the highest performance long wave focal planes
- LWIR high-durability, hard-carbon and low reflection hard-carbon AR coatings
- Passive athermalization with the highest imaging performance from -40 to +80°C
- Compatible with 12 & 17 μm pixel pitch, 1024x768 XGA format LWIR cameras
- Maintains sharp focus over the entire motorized zoom range
- Vehicle detection range exceeding 6.5 km Alle Funktionen anzeigen
HFOV [deg]
WFOV (16 mm)
| Format | |||||
|---|---|---|---|---|---|
| Pitch | 1280x1024 | ||||
| 12 µm | 54° | ||||
| 10 µm | 45° | ||||
NFOV (80 mm)
| Format | |||||
|---|---|---|---|---|---|
| Pitch | 1280x1024 | ||||
| 12 µm | 10.6° | ||||
| 10 µm | 9° | ||||
Spezifikationen
- TypeContinuous Zoom
- Focal Length16-80mm
- F/#1.2
- Back Focal Length19mm in air
- Minimum Focus RangeWFOV:2m;NFOV:20m
- Nuc (by defocus)Yes
- Focus MechanismMotorized. Adjustable
- Zoom MechanismMotorized
- Weight705gr
- DimensionsØ93.6mm x 108.4mm
- BWD8mm
- Thread4xM3x0.5
- Operating Temperature Range-32ºC to +70ºC
- Storage Temperature Range-40ºC to +80ºC
- SealingIP67 front element only
- Drive Voltage12VDC
- Communication InterfaceRS485, RS232
- Wavelength RegionLWIR
Funktionen
SupIR 16-80mm f/1.2 | LWIR Compact SXGA Zoom Lens for 10-12µm Detectors
SupIR 16-80 mm f/1.2 Detection, Recognition & Identification (DRI) Range
* Assumptions: 50mK NETD (f/1.0) for LWIR uncooled detectors | 30Hz frame rate | 50% detection probability | 0.2km-1 atmospheric attenuation coefficient | human ΔT = 5°C | vehicle ΔT = 2°C
DRI ranges enable one to easily estimate the maximum range that an object can be either detected, recognized or identified. It is important to note that these estimates are based solely on geometrical parameters – the target size, distance, lens focal length and camera detector pixel size. Signal level, detector sensitivity, atmospheric conditions and other factors are not considered!
The calculations used here are based on the “Johnson Criteria”. According to the Johnson Criteria, the minimum resolution, pixels on target, required to achieve a 50% probability for an observer to discriminate an object are:
- Detection: An object is present – 2 pixels on target (Lower Bar)
- Recognition: discern the type of object, a human vs. a vehicle – 8 pixels on target (Middle Bar)
- Identification: discern specific objects, a man vs. a woman, a car model – 12.8 pixels on target (Upper Bar)
Ressourcen
Data Sheets
SupIR 16-80 mm f/1.2 Datasheet(207.9 kB, PDF) SupIR 16-80 mm f/1.2 Product Overview (1.1 MB, PDF)
Drawings & CAD
680531 Interface Control Document(72.9 kB, PDF)
Literature
High Performance Optics for UAV Payloads and Drones(1.1 MB, PDF)




