Standard pyroelektrische OEM-Sensoren 1µJ – 40J
Standard pyroelektrische OEM-Sensoren 1µJ – 40J
Ophir produziert drei Arten pyroelektrischer OEM-Sensoren: Kompakte pyroelektrische Sensoren ohne eigene Elektronik Pyroelektrische Sensoren mit RS232- oder analogem Ausgang
- Kompakte, smart plug PE-C Sensoren mit eigener Elektronik in einem separaten Elektronikmodul
Die Standard OEM-Sensoren sind tatsächlich Produktfamilien vorhandener OEM-Sensoren mit den angegebenen Spezifikationen. Sie können alle an Ihre individuellen Anforderungen angepasst werden.
- Compact pyro sensors with no electronics
- Pyroelectric sensors with RS232 or analog output
- Compact smart plug PE-C sensors Alle Funktionen anzeigen
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | PE-C-REPE-C-REOEM Pyroelectric Energy Sensor, PE-C Series, Ø10 mm, 0.19-10.6 µm | |||||
 | PE10-C-REPE10-C-REOEM Pyroelectric Energy Sensor, from 1 µJ, Ø12 mm, 0.19-10.6 µm | |||||
 | PEXX-C-RS232PEXX-C-RS232OEM Pyroelectric Energy Sensor, PE-C Series, RS232 or Analog Output |
Funktionen
Overview of Ophir Pyro OEM Sensors
Do you need an energy sensor integrated inside your system? This video will give you an overview of the range of OEM energy sensor options available.
OEM Laser Power Meter and Sensor
In this video, Jimmy Green, Ophir OEM Specialist, explains how Ophir can solve laser measurement challenges if a solution cannot be found from the hundreds of products in our catalog.
Clarifications: Range Selection, Measurement Duration
Sometimes, even experienced users of laser measurement equipment come across some issues that, although basic, need to be clarified. This video reviews 2 such issues: (1) selection of correct range when it's not quite obvious (and what happens if one goes over range), and (2) how long a measurement duration may be.
Häufig gestellte Fragen
- Sensor Finder does not find a match for my application. Is there the possibility to create an OEM sensor for my application?Antwort
Yes, we have the ability to rapid prototype standard OEM sensors to help with custom applications where an off the shelf sensor does not fill the requirement.
- What is the dynamic range of OEM sensors?Antwort
In general, the dynamic range over a given range, i.e. the ratio of maximum useable power to minimum useable power of Ophir thermal OEM sensors is 40:1. If greater dynamic range is desired, Ophir OEM RS232 sensors are available with several selectable ranges.
- Do I need to recalibrate my instrument? How often must it be recalibrated?Antwort
Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.
Ressourcen
Data Sheets
Catalogs
OEM Sensors Catalog(4.4 MB, PDF) Energy Sensors Catalog(4.6 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
