BeamWatch® Berührungsloses Strahlprofilmessgerät für Multi-kW-Laser; 980-1080nm Wellenlänge
Overview
The BeamWatch und BeamWatch Plus: Berührungslos arbeitendes Strahlprofilmessgerät, das industrielle Laser mit mehreren Kilowatt Laserleistung anhand der Rayleigh-Streuung analysiert. Das Messgerät liefert Echtzeitmessungen des Strahlprofils entlang der Strahlausbreitung.
- Strahltaille bis hinunter auf 45um
- Eignet sich für Laser im NIR (950-1100) und VIS (420-635)
- Von 400W für NIR (3W für VIS) – keine obere Leistungsbegrenzung
- GigE Schnittstelle
- Beinhaltet BeamWatch Analyse-Software für Endanwender oder Techniker
Misst folgende Laserparameter
- Fokusspot (Taille) Breite und Position
- Fokusshift
- M² und BPP
- Divergenz
- Rayleigh Länge
- Tilt angle und Centroid
Products
| Compare | Model | Drawings, CAD & Specs | Availability | Price | |||
|---|---|---|---|---|---|---|---|
|
BeamWatch Plus, Berührungsloses Strahlprofilmessgerät für Multi-kW-Laser; 980-1080nm Wellenlänge
|
SP90613 BW-PLUS-45 BeamWatch Plus, Berührungsloses Strahlprofilmessgerät für Multi-kW-Laser; 980-1080nm Wellenlänge |
|
||||
|
BeamWatch Berührungsloses Strahlprofilmessgerät für Multi-kW-Laser; 980-1080nm Wellenlänge
|
SP90623 BW-NIR-130 BeamWatch Berührungsloses Strahlprofilmessgerät für Multi-kW-Laser; 980-1080nm Wellenlänge |
|
Specifications
-
Sensor TypeCCD camera, contactless
-
Spectral Range950-1100 nm
-
Focus Spot Size45 µm to ~2.75 mm
-
Power Range400 W(NIR) and 3 W(VIS) , to >100 kW
-
Maximum Beam Diameter at Entrance/Exit12.5 mm
-
CommunicationGigE
-
CE ComplianceYes
-
UKCA ComplianceYes
-
China RoHS ComplianceYes
Features
Measuring Focal Shift with BeamWatch
Is your laser's focus spot where you think it is? This video shows the focal shift of a 100 Kw laser during the first four seconds of startup using BeamWatch, Ophir's non-contact high power beam analyzer.
Focus Shift Monitoring of High Power Laser
BeamWatch™ utilizes disruptive technology to measure very high power YAG and fiber lasers. By not intercepting the beam and yet providing instantaneous measurements, you can now monitor the beam characteristic at frequent intervals without having to shut down the process or remove tooling and fixtures to get access. In addition, you can now measure focal spot location at millisecond intervals and know if there is any focal spot shift during those critical start-up moments.
BeamWatch Dynamically Measures 100kW Fiber Laser
The BeamWatch® industrial beam profiling system provides data that has never been seen or measured, even to laser users that have been working with high-power lasers for years. Through the dynamic measurement of beam waist location, the laser engineer can know how changes in power density affect the quality the process. For example, data is now available about the laser’s effect on the quality and consistency of laser welds, cuts, and holes drilled.
Laser Measurement Solutions for High Power Industrial Laser Applications
Modern production facilities must constantly increase throughput, at less cost, with less scrap, and with minimum downtime. In this video overview, you will learn how application of new, advanced technology in measurement devices, can help both designers and users of industrial laser systems to optimize and control their processes, so they can accomplish these goals and achieve consistently good results – both in quality and quantity.
Frequently Asked Questions
-
My laptop will not connect to the BeamWatch while connected to its docking station.
-
Answer
Many laptops disable the GigE port on the computer when docked. You can try the port on the docking station itself or use the GigE to USB adapter that came with the unit.
-
My beam measurement seems different than I expected. What can I do to check the measurement?
-
Answer
The measurement accuracy has been improved in recent versions of the software. It was discovered that a gain floor needed to be established to prevent early saturation of the camera. This gain floor was implimented in BeamWatch version 2.2.0. Please check your software version. If you are still having problems, please send a data file to our Service Group for analysis at service@us.ophiropt.com with an explanation of your problem.
-
When hooking up the purge line to the BeamWatch, what line-pressure should I allow to enter the unit?
-
Answer
The input pressure for the BeamWatch can range from 20 to 50 PSI. For optimal performance the pressure for operation should be around 40 PSI at 10 LPM.
-
With the BeamWatch how can I get readings void of comets or streaks in my image?
-
Answer
It is recommended that you supply clean, dry, filtered air or nitrogen to the BeamWatch. Also allowing the unit to purge for a time and adjusting the pressure with the inlet valve will help to eliminate most, if not all of the comets and streaks in the image. For more information please consult the manual under section 2.4. It is important to keep the dust covers over the openings of the BeamWatch in place until the purge air is flowing in order to prevent dust particle contamination prior to operation.
-
Answer
A beam dump is not included in the purchase of the BeamWatch. We recommend using a beam dump or equivalent product to protect people and equipment. When using a beam dump or a power sensor, it is not recommended to have the beam dump or power sensor too close to the exit aperture of the unit. Doing so will elevate the background which can impact the accuracy of the results.
A few options for beam dumps can be found here.
If you are interested in obtaining power meter readings at the same time, we would recommend some of our high power sensors that can be found here.
Resources
Data Sheets
- BeamWatch® Datasheet (267.2 kB, PDF)
Drawings & CAD
- BeamWatch Drawing (195.8 kB, PDF)
Manuals
- BeamWatch® Standard User Notes (1.2 MB, PDF)
- BeamWatch Standard Quick Start (943.4 kB, PDF)
- BeamWatch® Benutzerhandbuch (2.3 MB, PDF)
Technical Notes
- BeamWatch Rotation Mount User Note (596.4 kB, PDF)
- BeamWatch Camera Saturation (350.1 kB, PDF)
- Attenuation-Induced Error Due to Thermal Lensing
Catalogs
- Laser Beam Profilers Catalog (7.6 MB, PDF)
- Laser Power & Energy Measurement and Laser Beam Analysis Catalog (27.5 MB, PDF)
Application Notes
- Laser Micromachining
- Automotive Manufacturing
- BeamWatch Optimizes Laser Process Development
- The Challenge of Battery Production
Technical Articles
- Battle Axe vs. Scalpel: How to Work with High Power Density Lasers
- ISO Compliance of Non-contact, Real-time Beam Analysis
- How to Make Laser Welding and Cutting Affordable and Sustainable
- Sensor Fusion Enables Comprehensive Analysis of Laser Processing in Additive Manufacturing
- What Happens to Your Weld When Welding with High Power Over Long Periods of Time?
- Laser Measurements in Materials Processing
- Keeping Your Additive Manufacturing Laser in Spec
- BeamWatch Applications Generate Interest at FMA’s ALAW
- The Challenge of Focus Shift in High Power Laser Material Processing
Tutorials
Have questions? Require assistance?
Click below to to contact Ophir Photonics and we'll get back with you shortly.
Contact Ophir Photonics
Ultra-High Velocity