Радиометрический датчик PD300-BB с поворотным креплением оснащен фотодиодным датчиком с плоской спектральной характеристикой для измерения широкополосных источников света. Он охватывает спектральный диапазон 430—1000 нм и имеет апертуру 10 x 10 мм. Диапазон измерения мощности: от 50 пВт до 4 мВт. Версия 50 мВт измеряет от 50 пВт до 50 мВт. Датчик поставляется с 1,5-метровым кабелем для подключения к измерителю или интерфейсу компьютера.
- For measuring broadband light sources
- 430 to 1000 nm range
- 10 x 10 mm aperture Показать все функции
Характеристики
- Aperture Size10x10 mm
- MaterialSilicon
- Spectral Range430-1000 nm
- Minimum Power50 pW
- Maximum Average Power4 mW (50 mW PD300-BB-50mW with filter)
- Maximum Average Power Density10 W/cm² (100 W/cm² PD300-BB-50mW with filter)
- Maximum Pulse Energy1 µJ (10 µJ PD300-BB-50mW with filter)
- Response Time0.2 s
- Cable Length1.5 m
- CE ComplianceYes
- UKCA ComplianceYes
- China RoHS ComplianceYes
Функции
Measuring Very Low Laser Powers with a Photodiode Sensor
In this short “Basics” video, we review in general the use of photodiode sensors for measuring very low laser powers.
How to Measure Power of Broadband Sources
This video explains how to use Ophir sensors and meters to measure the power or energy of broadband light sources such as solar radiation, flash lamps, LEDs, etc.
Часто задаваемые вопросы
- I am using a PD300 type sensor. I have a broadband light source, but only want to measure the power of a specific wavelength. Can I set my meter to that wavelength and get a measurement?Ответ
The PD300 series of photodiode-based sensors are calibrated with a full spectral curve using a scanning monochromator (plus a few laser "anchor points").
The wavelength ("Laser") setting tells the meter what wavelength is being used and hence what calibration factor to apply when a measurement is underway. It does not, however, physically limit the possibility of other wavelengths from entering. All light (within the sensor's specified range of course) entering the detector will be measured; the meter will apply the calibration factor meant for the selected wavelength, "thinking" that only that wavelength is present.
In other words, these sensors assume a monochromatic light source. Their relative spectral response is not flat and they are therefore not suited for broadband beams.
So, if you want to check one wavelength from a broadband source, you will need to use a wavelength filter that only passes that wavelength. Then you should set your meter to the appropriate wavelength to account for the detector's relative sensitivity.
- Do I need to recalibrate my instrument? How often must it be recalibrated?Ответ
Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.
Аксессуары
Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
![]() | 7Z02418PD300-CDRH-7mmCDRH Adapter, Ø7 mm Aperture, Wand Type Power Sensor | |||||
![]() | 7Z08336PD300-CDRH-3.5mmCDRH Adapter, Ø3.5 mm Aperture, Wand Type Power Sensor | |||||
![]() | 7Z08221PD300 SC Fiber AdapterFiber Adapter, SC Type | |||||
![]() | 7Z02210PD300 ST Fiber AdapterFiber Adapter, ST Type | |||||
![]() | 7Z02213PD300 FC Fiber AdapterFiber Adapter, FC Type | |||||
![]() | 7Z02212PD300 SMA Fiber AdapterFiber Adapter, SMA Type | |||||
![]() | 7E01125A5 m PD300 Sensor CableOptical Sensor Cable, 5 m Length | |||||
![]() | 7E01125B10 m PD300 Sensor CableOptical Sensor Cable, 10 m Length | |||||
![]() | 7E01125C3 m PD300 Sensor CableOptical Sensor Cable, 3 m Length | |||||
![]() | XWAR-SENSORExtended Warranty for Sensor |
Precision Mount Kits for PD300 sensors
Precision Mount Kits for PD300 sensors can be used with all of our standard PD300 photodiode sensors. The kit assures fixed sensor position in a test setup either vertically or horizontally.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
![]() | 7Z08220PD300 Precision Mounting KitPD300 Precision Mounting Kit |
Ресурсы
Data Sheets
Catalogs
Power Sensors Catalog(11.2 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
Drawings & CAD
PD300-BB Drawing(115.6 kB, PDF) PD300-BB-50mW Drawing(144.3 kB, PDF)
Videos
Technical Notes
5 Situations Where Laser Performance Measurement is Necessary Effect of Ambient Conditions on Laser Measurements How to Properly Select a Laser Power or Energy Sensor

















