High-Power Laser Measurement: Cooling Methods
Measurement of high-power lasers requires efficient heat control in power measurement sensors. Choosing the right heat transfer method is a […]
High-Power Laser Measurement: Cooling Methods Read Post »
Category: Laser Power Sensors
Medical lasers: When the Laser Application Requires Utmost Safety
The continuous development of laser technology has revolutionized many areas of our lives in the past decades. The most direct
Medical lasers: When the Laser Application Requires Utmost Safety Read Post »
Effect of Ambient Conditions on Laser Measurements
We are often asked about the specified ranges of various ambient conditions (temperature, humidity, etc.) for Ophir instruments. In this
Effect of Ambient Conditions on Laser Measurements Read Post »
Integrating Sphere Fundamentals and Applications
An integrating sphere collects electromagnetic radiation from a source, usually external to the optical device, for flux measurement or optical attenuation.
Integrating Sphere Fundamentals and Applications Read Post »
How to Use LabVIEW to Automate Measurement of High Frequency VCSEL
When measuring high frequency sources, one usually must decide whether they need to know the average power or the temporal
How to Use LabVIEW to Automate Measurement of High Frequency VCSEL Read Post »
Monitoring your laser Position and Beam Size over time in StarLab with a BeamTrack sensor
StarLab is Ophir’s easy-to-use, yet powerful, laser measurement software that turns a PC into a multi-channel laser power / energy
Finding a Sensor From the Catalog Spec VS. Using the Sensor Finder
When we have a laser with certain characteristics and we want to know which Ophir Power/Energy sensors are suitable, we
Finding a Sensor From the Catalog Spec VS. Using the Sensor Finder Read Post »
Can I Use My Beamtrack Sensor With a Pulsed Laser?
The answer to this is, of course, it depends. It depends on the pulse frequency and it depends on which
Can I Use My Beamtrack Sensor With a Pulsed Laser? Read Post »
LiDAR: Measuring the Measurement System is Essential
Many experts believe LiDAR (Light Detection and Ranging) is one of the pivotal sensing technologies required to make partial to
LiDAR: Measuring the Measurement System is Essential Read Post »
What to Do if the Laser Power Sensor You’re Looking For is Obsolete
If you need to replace your laser power sensor, but can’t find it on our website, check this page to see if it has been discontinued.
What to Do if the Laser Power Sensor You’re Looking For is Obsolete Read Post »
Measuring Diffuse Reflectance
Diffuse reflectance describes how light scatters from a surface. This article explains what it is, how it’s measured, and why it matters in optical applications.
Measuring Diffuse Reflectance Read Post »
Is It Normal for Two Ophir Sensors to Have Different Readings?
Customers often measure the same laser with 2 different Ophir sensors, both of which are specified to be within calibration.
Is It Normal for Two Ophir Sensors to Have Different Readings? Read Post »