Recent updates and news in the world of power and energy measurements
The Centauri power meter has the best of both worlds. It’s not a full PC of course, but has nearly the same feature set as our StarLab software, with a large, 7” touch screen.
Highly Versatile Laser Power Meter Setup Read Post »
As electric vehicles enter the mass market, productions lines need to as efficient as possible. In order to assure quality in the automated process, it is essential to measure the laser source of the welder regularly.
Laser Welding for Electric Vehicle Production: How to Maintain Quality Read Post »
For years, Ophir Photodiode sensors have been listed at an accuracy of mostly ±3%. But what is the real accuracy?
How Accurate are Ophir Photodiode Sensors Really? Read Post »
Ophir® 16K-W High Power Laser Sensor – A compact sensor for measuring very high power lasers
“Additional error with frequency”. What does it mean? Why does it happen? Read all about that in this week’s blog post:
“Additional Error with Frequency” – What is that? Read Post »
Jim purchased a very high power laser. After a few years he noticed something was wrong with the laser and had to halt his entire production line while he waited for the necessary repair. Read more:
Measuring Extremely High Power Lasers (up to 120 kW) Read Post »
Ophir has two sensors specially made to handle IPL energy measurement. These sensors make it much easier to keep the IPL systems in check, but how can you be sure that the sensors themselves are accurate?
IPL Energy Measurement: How Ophir Maintains Accuracy of its Sensors Read Post »
Meet Ophir’s “Scope Adapter” for Pyroelectric sensors. The adapter connects between the sensor & the meter. A BNC connector carries an analog voltage signal that represents the energy of each pulse, at up to the maximum pulse rate that the sensor can respond to, without being limited by the maximum pulse rate of the meter.
Make the Most Out of Your Sensor with Ophir’s “Scope Adapter” for Pyroelectric Sensors Read Post »
Centauri now connects to our well established StarLab PC application! The StarLab application together with a Centauri meter turns your PC into a full-fledged advanced laser power/energy meter at your fingertips on your PC keyboard
Connect Your Centauri Power Meter Directly to Your PC Read Post »
Measuring a Low Frequency Laser or VCSEL? Use These Tips to Increase Accuracy
Measuring a Low Frequency Laser or VCSEL? Use These Tips to Increase Accuracy Read Post »
A Thermopile power sensors may give a reading even when there is no laser radiation pointed at them. Here’s how you can deal with it…
Zeroing and Offset in Thermopile Power Sensors Read Post »
This blog post is dedicated to everyone who came by our booth at the 2019 Munich Laser World of Photonics Trade show.
Thank you for Visiting us at 2019 Laser World of Photonics Trade show! Read Post »
