StarLab PC Software Math Channels
StarLab is Ophir’s easy-to-use, yet powerful, laser measurement software that turns a PC into a multi-channel laser power / energy […]
StarLab PC Software Math Channels Read Post »
StarLab Converts Your PC into a Multi-Channel Power Meter Workstation.
The StarLab PC application supports the simultaneous use of multiple power and energy laser measurement sensors by assigning each sensor
StarLab Converts Your PC into a Multi-Channel Power Meter Workstation. Read Post »
New features in StarLab 3.5
StarLab is Ophir’s easy-to-use, yet powerful, laser measurement software that turns a PC into a multi-channel laser power / energy
New features in StarLab 3.5 Read Post »
Measure Very High Power Lasers with a Small Air-Cooled Sensor – Now Supported by Centauri
If you have any experience monitoring lasers of varying powers, you should be familiar with the basic categories of thermal sensors
Update StarLab for New Features and Complete Compatibility
Unless you’re new to StarLab, you probably already know that we come out with a new version every couple of years.
The new version is free to download, so there’s no reason not to go ahead and download it now.
But time is money, so here are a few reasons to take two minutes and download StarLab 3.40.
Update StarLab for New Features and Complete Compatibility Read Post »
How to use Centauri Data Logging
With Centauri’s latest firmware, you can log up to 2 GB of data onboard, as well as up to 32 GB on a USB flash drive. That’s equivalent to hundreds of log files onboard alone (depending on the various log file parameters).
How to use Centauri Data Logging Read Post »
Measure Average Power of VCSELs with Centauri
VCSELs and other low frequency are not trivial to monitor them with a standard photodiode. See how Ophir addresses this with its recently added feature
Measure Average Power of VCSELs with Centauri Read Post »
Highly Versatile Laser Power Meter Setup
The Centauri power meter has the best of both worlds. It’s not a full PC of course, but has nearly the same feature set as our StarLab software, with a large, 7” touch screen.
Highly Versatile Laser Power Meter Setup Read Post »
Connect Your Centauri Power Meter Directly to Your PC
Centauri now connects to our well established StarLab PC application! The StarLab application together with a Centauri meter turns your PC into a full-fledged advanced laser power/energy meter at your fingertips on your PC keyboard
Connect Your Centauri Power Meter Directly to Your PC Read Post »
Meet Centauri – Ophir’s New High End Portable Laser Power/Energy Meter
When talking about power/energy meters there are certain parameters that almost never change. Generally, smaller meters have smaller screens and
Meet Centauri – Ophir’s New High End Portable Laser Power/Energy Meter Read Post »
How can I communicate with an Ophir laser Power Meter using a Linux machine?
Let’s say the computers used in your laser environment happen to use Linux as an operating system, and you want
How can I communicate with an Ophir laser Power Meter using a Linux machine? Read Post »
The only hand-held Ophir meter that measures laser exposure/dosage
Usually, when discussing laser measurements, we often refer to the power or energy of the laser. Sometimes though, we need
The only hand-held Ophir meter that measures laser exposure/dosage Read Post »