Where affordability meets design, the SupIR 26-105mm f/1.6 motorized focus LWIR imaging zoom lens has a 26 to 105 mm focal length with an f-number of 1.6. This continuous zoom lens is designed for 1024x768 XGA format uncooled LWIR cameras.
- Affordable, cost-effective solution for high-resolution thermal imaging and sensing that doesn’t compromise on performance
- Optimized for LWIR 17 μm detectors
- Easy integration and operation
- Available with high durability (HD), and hard carbon (HC) coating
- Maximum performance at minimal price
- Vehicle detection range exceeding 6 km 查看所有功能
HFOV [deg]
WFOV (26 mm)
| Format | |||||
|---|---|---|---|---|---|
| Pitch | 320x240 | 640x480 | 1024x768 | ||
| 17 µm | 12.5° | 25.3° | |||
| 12 µm | 8.8° | 17.7° | 28.7° | ||
NFOV (105 mm)
| Format | |||||
|---|---|---|---|---|---|
| Pitch | 320x240 | 640x480 | 1024x768 | ||
| 17 µm | 3.0° | 5.9° | |||
| 12 µm | 2.1° | 4.2° | 6.7° | ||
规格
功能
SupIR 26-105mm f/1.6 Detection, Recognition & Identification (DRI) Range
* Assumptions: 50mK NETD (f/1.0) for LWIR uncooled detectors | 30Hz frame rate | 50% detection probability | 0.2km-1 atmospheric attenuation coefficient | human ΔT = 5°C | vehicle ΔT = 2°C
DRI ranges enable one to easily estimate the maximum range that an object can be either detected, recognized or identified. It is important to note that these estimates are based solely on geometrical parameters – the target size, distance, lens focal length and camera detector pixel size. Signal level, detector sensitivity, atmospheric conditions and other factors are not considered!
The calculations used here are based on the “Johnson Criteria”. According to the Johnson Criteria, the minimum resolution, pixels on target, required to achieve a 50% probability for an observer to discriminate an object are:
- Detection: An object is present – 2 pixels on target (Lower Bar)
- Recognition: discern the type of object, a human vs. a vehicle – 8 pixels on target (Middle Bar)
- Identification: discern specific objects, a man vs. a woman, a car model – 12.8 pixels on target (Upper Bar)
Your Long Range Distance Needs Met
光学镀膜
我公司的高耐磨增透膜(AR),以及多种类型的硬碳膜(HC)拥有最高耐用性、能量传输及最小反射率。
- 物理气相沉积(PVD)– 热熔性和电子枪
- 离子辅助沉积(IAD)– 离子枪
- 等离子增强化学气相沉积(PECVD),适用于DLC镀膜
Passive Athermalized Lens Assembly
Our IR imaging lens assemblies incorporate passive athermalization of the lenses and opto-mechanical system to maintain the highest imaging performance over the full operating temperature range. We use advanced materials that enable unique athermalization properties and optomechanical designs that effectively compensate for optical variations over a wide temperature range.
IR Optics Production Site Virtual Tour
Applications
Commercial
Defense
资源
Drawings & CAD
680320 Interface Control Document(150.8 kB, PDF)
Meet-the-affordable_680320.pdf(219.9 kB, PDF)






