Overview

StarViewer Feature Highlights

  • Turn your smartphone or tablet into a laser power / energy meter
  • Works a selection of Ophir devices
  • Display measurements as line graph, simulated analog needle, or full screen numeric display with statistics
  • Screen Capture and Share built into the application
  • Measurement settings fully configurable to match your laser measurement needs
  • Great for field technicians that make service calls
 
StarViewer

StarViewer brings laser power and energy measurement to your smartphone / tablet from our selected devices. It is an intuitive easy-to-learn application. Just install it, connect to your device, and get started immediately.

StarViewer allows you to display the measurement in a time-based line graph, as a needle display, or large numeric display with statistics.

You can also perform a screen capture and share it. Great for field technician's reporting results back to the lab.

StarViewer (Android app) v3.08.3

Overview:
  • Available on Google Play (Android version 7 or higher)
  • Works with Ariel/Juno/Quasar devices
  • StarViewer brings laser power and energy measurement to your Smartphone / Tablet from our Ariel, Juno & Quasar devices
StarViewer

Connectivity:
StarViewer can be used with any standard Ophir Thermopile, Photodiode, or Pyroelectric PE-C sensor
StarViewer can be used with the Juno via your device's USB on-the-go (OTG) port, or with the Quasar and Ariel via Bluetooth. StarViewer

The measurement settings are fully configurable by opening the settings panel at the left of the screen:

StarViewer

For use with the Ariel:
  • Bluetooth: Minimum version 4.0 required, 5.1 recommended
  • Ariel firmware version 1.33 or higher
  • StarViewer supports and leverages Ariel's measurement capabilities to display Continuous Power, Single Pulse Energy, and Pulsed power together with Pulse width, Battery level and temperature
  • Note: The Ariel you are using might have a lower F/W version, please update it to v1.33
For use with the Juno:
  • Smartphone / tablet with an OTG port, capable of providing 100mA or more downstream current
  • Optional - OTG adapter - from USB connector on your device to USB Type A Female Adapter (for Juno cable)
  • Juno firmware version 1.39 or higher
For use with the Quasar:
  • Bluetooth capability
  • Quasar version 1.25 or higher
  • PIN code for Bluetooth pairing is 1234
Note: StarViewer does not support measurement with Pyroelectric sensors with the Quasar

Requirements:
  • Android version 7 or higher
StarViewer
Ophir StarViewer Android App


 
StarViewer (iOS app) v1.1.4

Overview:
  • Available on Apple's App Store (iOS version 8 or higher)
  • Works with Ariel
  • StarViewer brings laser power and energy measurement to your Smartphone / Tablet from our Ariel device
StarViewer

Connectivity:
StarViewer can be used with Ariel via Bluetooth
StarViewer
The measurement settings are fully configurable by opening the settings panel at the left of the screen:

StarViewer

For use with the Ariel:
  • Bluetooth: Minimum version 4.0 required, 5.1 recommended
  • Ariel firmware version 1.33 or higher
  • StarViewer supports and leverages Ariel's measurement capabilities to display Continuous Power, Single Pulse Energy, and Pulsed power together with Pulse width, Battery level and temperature
  • Note: The Ariel you are using might have a lower F/W version, please update it to v1.33
Requirements:
  • iOS version 8 or higher
StarViewer
Ophir StarViewer iOS App

Specifications

 
Supported Devices StarViewer (Android app) v3.08.3
USB: Juno
Bluetooth: Quasar, Ariel

StarViewer (iOS app) v1.1.4
Bluetooth: Ariel
Compatibility Android 7.0 or higher
iOS version 8.0 or higher

Resources

How to Use the StarViewer Android App to Operate the Ariel

Documentation

Related Products

Contact Us illustration

Have questions? Require assistance?

Click below to to contact Ophir Photonics and we'll get back with you shortly.

Contact Ophir Photonics