Устройство для 4-кратного уменьшения лазерного пятна
Устройство представляет собой систему для формирования изображения на ПЗС-матрице с 4-кратным уменьшением и инвертированием. Фокусное расстояние имиджа 30 см. Важно упомянуть, что интенсивность пучка после сжатия увеличивается в 4 x 4 = 16 раз.
Specification
- 360nm-1100nm
- C-mount
- 30mJ per pulse for nanosecond pulses
- Ø50mm
- 4X
Ordering
-
4X reimaging beam reducer
SPZ17017Screw on beam reducer for beams in the wavelength region 360 - 1100nm that reimages the beam 30cm in front of the unit onto the CCD while reducing the beam size 4X. Entrance aperture is 50mm. Fits 4.5mm recess cameras only
Запросить расценки
Documentions
Accessories
-
LBS-100 to 4X beam reducer adapter
SPZ17029This adapter enables mounting of the LBS-100 beam splitter/attenuator assembly in front of the 4X beam reducer. The combined assembly can image large high power beams in one unit.
-
Beam splitter large wedge
SPZ17018Wedge, UVFS, 44X32 mm, uncoated wedge housing mounts to 1/4” thread, 1/2” diameter laboratory rod (not included)
-
The LBS-300s beam splitter attachment for C-mount, CS-mount, or Ophir mount cameras allow you to measure laser beams with diameters up to 15mm and powers ranging from 10mW to ~400W(1). The beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization -
The LBS-400 beam sampler attachment for Pyrocams and large format Beam Profilers allows measuring UV, NIR or IR wavelength laser beams with diameters up to 1 inch (25.4mm) and powers ranging from 10mW to ~500W(1). The output beam preserves the polarization of the original beam. -
The LBS-100 system that is not as compact as the LBS-300s above but has