The Ophir FluxGage™ devices measure light parameters of LED luminaires and LED boards in 2π geometry in a matter of seconds. The easy-to-use measurement system captures and calculates data such as total luminous flux, chromaticity, CCT, Rf and Rg as per TM-30, illuminance and flicker as well as PPF. Depending on size and characteristic of the LED luminaire, different product lines are available that are all based on the use of solar panels as light detectors. The systems can be used in R&D, end-of-line LED luminaire production applications as well as in incoming inspection. FluxGage can quickly eliminate the ambient light with a simple background measurement. Additionally, a custom-made coverplate can be used so there is no need of a dark room. With its different sizes and sensitivities it can easily be applied in a wide variety of applications, e.g. industrial, architectural, commercial, street, signage, horticultural lighting and many more. The FGC100 calibration standard is used to calibrate the FluxGage systems. To find out how the Ophir FluxGage system saves time and money in different applications, see our case studies.
The Ophir FluxGage™ 600 systems feature an aperture size of 64 x 48 cm that corresponds to the maximum size of the luminaire under test. Due to the system's compact dimensions it can be placed in relatively small spaces. Being very robust, FluxGage 600 systems can even be used flipped on the side or in a vertical position. The FluxGage 600 series is available in different sensitivities. Luminous flux measurement ranges from 20 lm in the high resolution version with CCD spectrometer up to 40.000 lm at standard version.Show Products >