Manuals

The Ophir Centauri is a microprocessor-based laser power/energy meter with single and dual channel options that provides a broad range of measurements, displays, and data handling options. It operates with thermal, pyroelectric, and photodiode sensors.

The Centauri is equipped with a 7" full color touch screen. Sensor parameters can be updated with a few taps on the screen. In addition, the Channel Options menu, reached by tapping the three-dot icon ( ), enables access to additional features.

The Ophir Laserstar is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric and photodiode heads, and uses smart connector technology.

The Nova is equipped with “soft keys.” That is, the functions of the keys change as indicated by the legend above each key. When the Nova is first switched on with a sensor attached, the first screen usually has a digital display with a bargraph at the bottom

This manual describes how to operate the Ophir StarLab application with any of the compatible Ophir measuring devices

The IPM-10KW has heavy duty connectors and an interlock output. For more protection, the user can order the IPM-Shutter10 which provides an automated shutter with a field replaceable anti reflective coated window (see next section). Integration into modern automation systems is available with the IPM-COM communication module (EtherNet and Profinet).

The Ophir StarBright is a microprocessor-based Laser Power/Energy Meter that provides a broad range of measurements, displays, and data handling options. It operates with Thermopile, Pyroelectric, and Photodiode sensors.

The Nova II is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round enter key in the center

To connect sensor to the LaserStar meter: Insert the 15 pin D type connector of the measuring sensor cable into the socket marked “Head Input” on the rear panel of the LaserStar meter. If you are using the multisensor version of the LaserStar and are using only one sensor, it is preferable to use sensor input A.

The EA-1 is an Ethernet Adapter intended for OEM customers. It is designed to work with standard or OEM Ophir smart-plug sensors using a D15 connector. The EA-1 supports Ophir thermopile, photodiode, pyroelectric (PE-C) and PD10 series sensors.

The Helios sensor measures high power industrial lasers by measuring the energy of a short time exposure of the CW laser. The laser should be set to pulse from 0.1 to several seconds. The Helios measures the energy and exposure time of this sample of the power, and from this calculates the CW power.

The Ariel measures high power industrial lasers of up to 8kW by measuring the energy of a short exposure to this power. The laser is set to deliver a pulse of from 0.05 to several seconds. The Ariel then measures the energy and duration of the laser pulse and calculates the power. The Ariel is designed to work without water cooling.

The Comet laser power probe is simple to use, economical but also highly accurate. It operates by measuring the heat rise from a 10 second exposure to a laser beam and thereby calculates the laser power.

The FPS-1 fast photodetector is designed to measure the temporal behavior of pulsed lasers. The FPS-1 has two modes of operation: a. High speed and low sensitivity into 50Ω load with 1ns response time. b. High sensitivity into 10KΩ with 3µs response time

Fast Photodiode Detectors FPD-IG-175, FPD-UV-3000, FPD-VIS-300 Ophir Optronics Solutions Ltd. Temporal Sensors User Manual

User Notes for Ophir Model PE50BB-DIF-C - Ophir P/N 7Z02947 (RoHS) Ophir Model PE50-DIF-ER-C - Ophir P/N 7Z02948 (RoHS) Ophir Model PE100BF-DIF-C - Ophir P/N 7Z02942 (RoHS) with diffuser

Ophir devices (Ariel, Centauri, StarBright, StarLite, Juno, Juno+, Vega, Nova II, Pulsar) can also be used through a COM object control. This allows system integrators to integrate Ophir measurement capabilities with legacy analysis packages.

The StarBright is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round enter key in the center.

The Ophir Vega is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric and photodiode sensors, and uses smart connector technology.

The Vega is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round enter key in the center.