High Power Thermal Sensors and Power Pucks – 1W to 120kW

The 1000W-BB-34 is a water cooled thermal power/energy laser measurement sensor with a 34mm aperture. It can measure power from 5W to 1000W and energy from 300mJ to 300J. It has the spectrally flat broadband coating and covers the spectral range from 0.19 to 20µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

The 1000W-LP2-34 is a water cooled thermal power/energy laser measurement sensor for high power density and long pulse lasers. It has a 34mm aperture and can measure power from 5W to 1000W and energy from 400mJ to 300J. Its high damage threshold LP2 coating covers the spectral range 0.35 – 2.2µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

The L1500W-BB-50 is a water cooled thermal power/energy laser measurement sensor with a 50mm aperture. It can measure power from 15W to 1500W and energy from 500mJ to 200J. It has the spectrally flat broadband coating and covers the spectral range from 0.19 to 20µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface. New: QBH-Fiber Adapters (see 'Accessories' below): for mounting fiber with QBH termination to this sensor.

The L2000W-BB-120 is a water cooled thermal power/energy laser measurement sensor with the very large aperture of 120mm. It can measure power from 1W to 2000W and energy from 6J to 6000J. It has the spectrally flat broadband coating and covers the spectral range from 0.19 to 20µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

The 5000W-BB-50 is a water cooled thermal power/energy laser measurement sensor with a 50mm aperture. It can measure power from 20W to 5000W. It has the spectrally flat broadband coating and covers the spectral range from 0.19 to 20µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface. New: QBH-Fiber Adapters (see 'Accessories' below): for mounting fiber with QBH termination to this sensor.

The 5000WP-LP2-50 is a water cooled thermal power/energy laser measurement sensor for high power density and long pulse lasers. It has a 50mm aperture and can measure power from 20W to 5000W. Its high damage threshold LP2 coating covers the spectral range 0.35 - 2.2µm. This sensor is specially designed for noncontaminating water flow. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

The Helios Plus - Profinet measures high power industrial lasers of up to 12kW by measuring the energy of a short time exposure to this power. The laser is set to a pulse of from 0.3 to several seconds. The Helios Plus - Profinet measures the energy and exposure time of this sample of the power, and from this calculates the power. By keeping the pulse energy under 5 kJ, there is no need for water cooling and the Helios power sensor can be kept to a compact size. Helios Plus - Profinet is a version of Helios that has Profinet and RS232 communications. For EtherNet/IP communication please see Helios Plus - EtherNet/IP

Measures up to 8000W Compact and self-contained with built in display, battery, and Bluetooth communication No Water Cooling Dust proof, splash proof Includes a detachable diffuser for high power density beams Wavelengths: 440-550nm, 900-1100nm, 2.94μm, 10.6μm High thermal capacity of 14KJ for uninterrupted consecutive measurements Only 3 seconds to display measurement Long battery life: more than 15 hours Two measurement modes: short exposure ‘power-from-pulse’ and continuous Supported by PC and Android applications In ‘power-from-pulse’ mode, the Ariel measures high power industrial lasers of up to 8kW by measuring the energy of a short exposure to this power. The laser is set to deliver a pulse of from 0.05 to several seconds. The Ariel then measures the energy and duration of the laser pulse and calculates the power. In continuous mode, the Ariel measures up to 500W for as long as 20s, or up to 30W continuously. The Ariel is ideal for usage in tight spaces such as additive manufacturing chambers as well as for production process quality control and R&D.

The 15K-W-BB-45 is a water cooled thermal power/energy laser measurement sensor for very high powers with a 45mm aperture. It can measure power from 100W to 15,000W. It has a deflecting cone and annular absorber that withstands high power densities to 10kW/cm². It covers the spectral range from 0.8 - 2 and 10.6µm. The sensor comes with a standard 5 meter cable for connecting to a meter or PC interface.

The 30K-W-BB-74 is a water cooled thermal power/energy laser measurement sensor for high powers with a 74mm aperture. It can measure power from 100W to 30,000W. It has a deflecting cone and annular absorber that withstands high power densities to 10kW/cm². It covers the spectral range from 0.8 - 2 and 10.6µm. The sensor comes with a standard 10 meter cable for connecting to a meter or PC interface.

The Comet 1K is a portable power puck laser sensor with a 50mm aperture. It can measure power from 20W to 1000W by sampling a 10s exposure of laser power. It has the spectrally flat broadband coating and covers the spectral range from 0.2 to 20µm.