Fiber Optics Sensor Accessories

Fiber-coupled lasers are being used more than ever, in telecom as well as other applications. Ophir power and energy sensors can measure the output from a fiber in free space, regardless of fiber type. Alternatively, we offer fiber adapters for FC, ST, SC, and SMA types. Most sensors need a mounting bracket in addition to the fiber adapter. Some can be used directly with an adapter.

Fiber Optic Adapters

Each standard fiber type that Ophir supports has its own adapter. This adapter works with most Ophir sensors. (Many need a mounting bracket; some can be connected as is).
Show Products >
ファイバーオプティクス接続アダプター

Each standard fiber type that Ophir supports has its own adapter. This adapter works with most Ophir sensors. (Many need a mounting bracket; some can be connected as is).
Show Products >
Photodiode Mounting Brackets

The round PD300R series can use a mounting bracket to connect with various fiber adapters (SC, FC, ST and SMA). The FPS-1 fast photodiode can use the same mounting bracket. Integrating spheres (3A-IS) use a different mounting bracket. Rectangular photodiode sensors (PD300) have their own fiber adapters and do not require mounting brackets.
Show Products >
Thermal Mounting Brackets

Low power thermal sensors (3W-12W) don’t need a mounting bracket and can be used directly with a fiber adapter (SC, FC, ST or SMA). Most other thermal heads can use one of the brackets below. For high power (600W and up) contact your local Ophir representative.
Show Products >
Pyroelectric Mounting Brackets

There are three mounting brackets available for different types of energy sensors. Use the mounting bracket specified for your sensor and then the fiber adapter that matches the type of fiber you are using (FC, SC, ST, or SMA).
Show Products >