Articles

Select any filter and click on Search to see results

返送された装置の再校正を行う中で、仕様が満たされなくなることの背景には共通の原因があることがわかりました。この書面は、ユーザの皆様にオフィール社のフォトダイオードセンサの正しい使用法及びメンテナンスについて理解していただくためのものです。ここで提供される情報はあくまでも参考としてのものです。センサの動作が仕様を満たしていないと思われる場合は、必ずキャリブレーションセンターへお問合せ下さい。

正しくご使用いただければ、修理せずに何年もご利用いただくことが可能で、実際、数十年以上もトラブルなく使用されているユーザもいらっしゃいます。長寿命で高信頼性というオフィール社の製品の特長を享受いただくために、この書面をお役立て下さい。

Read Tutorial 詳細

This document discusses the interpretation and basis for stated measurement accuracy of Ophir Laser Power/Energy meters.
1. General Discussion
2. Combination of Errors and Total Error
3. Analysis of Power and Energy Calibration Errors
4. Detailed Analysis of Power and Energy Calibration Errors

David K. Moser, M.Sc. Physics - Optical Engineer & Jed Simmons, Ph.D. - Physicist

Industry-Focused Design

BeamWatch AM is the newest member of Ophir-Spiricon’s family of beam monitoring systems. It has been designed specifically for use in the additive manufacturing industry to provide non-interfering real-time beam measurement at the location of the working plane. Rigorous testing has been performed to ensure it meets the specifications detailed in Table 1 to the right.

Rayleigh-Scatter Technology

...

Proper alignment of the MS-1780 is essential for its operation, and this can occasionally seem difficult to achieve. Here is a simple method for making sure the system is properly aligned to get the “first light” conditions that will allow easy fine tuning for experimental results.
 
In order for the system to work properly the laser beam needs to enter the optical center of the aperture on the horizontal axis of the instrument. In order to be able to fine-adjust the beam it is useful to use steering mirrors to direct...

By John McCauley, Midwest Sales Engineer, Ophir-Spiricon, LLC

We started by taking a power reading with the 10kW sensor and a Juno USB Interface to a local PC. This particular sensor had a damaged spot on the thermopile element, so I’m not sure it was giving us an accurate reading. However, here were the recorded power readings:

...

By Derrick Peterman, Northern California Sales Engineer, Ophir-Spiricon

By John McCauley, Midwest Sales Manager, Ophir-­Spiricon

The New Year is a time to look back on the past year and contemplate how to do things better. It’s a time to make New Year’s resolutions in an effort to be a better person and do things better. One of the most common and popular New Year’s resolutions is the renewed commitment to losing weight. As many of us are all too familiar with, that means eating better and getting...

By Nicolas Chaise, Regional Sales Manager, Ophir Spiricon Europe

Nowadays, it is quite common to weld with a laser. But some welding applications still require expert skills and customized solutions.

A customer of ours in the shipyard market owns a powerful 12KW fiber laser. Most of the time, they weld small metals pieces. But for a new application, it required a new process.
 
Welding Large...

By John McCauley, Product Specialist, Ophir-Spiricon

High-power industrial lasers are valuable tools in material processing. Maintaining them at peak performance and optimizing the processes for which they are used will maximize throughput and minimize downtime. Periodic measurement and longterm monitoring of key laser variables, including laser output power, focused spot size, and focus spot temporal location provide the data you need to increase accuracy and optimize your process.

...

The need to profile lasers with powers in the 10mW to 1W range are becoming more common. Many of these lasers are in the visible spectrum, allowing them to be measured with CCD and CMOS camera systems. As with any laser that is being measured with a camera array, the beam needs to be attenuated, but there are some cautions to be observed. These beams are not so powerful that they will damage or destroy typical absorptive filters. In fact, it is possible to stack up a sufficient optical density to reduce the power of a 1W laser to the nW...

By Allen Cary, Director of Marketing, Ophir-Spiricon

 

The Partition feature, available in BeamGage Professional, allows subdividing the camera imager into separate regions, called partitions, and which can then compute separate beam results within each partition.
Anyone who has driven a vehicle has encountered a Light Detection and Ranging (LIDAR) system in action. Some of you have even found out how much it can cost in terms of speeding fines! Let’s take a closer look behind the scenes. How do we know the detector is working?
<新規レーザ>4kW、808nmダイオードレーザ、レンズあり12.5mm x 1mm、RobotworxのMotoman6軸ロボット使用。

By Dick Rieley, Mid-Atlantic Regional Sales Manager, Ophir-Spiricon

When a laser malfunctions and diagnostics begin, why is test equipment the first to be questioned for its accuracy when it was the laser that failed first ?
 
Recently, I had a customer with a 3D system designed to produce 25mW. However as tested on our 30A thermal sensor, it measured 75mW’s! The customer called to complain that our sensor was not working. The sensor was calibrated, did not show any damage to the disc...

パルスエネルギでレーザ溶接計測に多くのユーザが携わっていますが、全ての計測データは溶接の品質保障に対して必要でしょうか? Steve Schellenberg氏(Spinal Modulation)はその点について疑問を持っています。
1997年、 Spiricon Inc.,の創設者であるDr. Carlos Roundyはドイツミュンヘンでの第4回インターナショナルワークショップ(レーザ&オプティクス)で発表しました。

The NS v2 software is the same for both Standard and Professional, no need to download/install a different version. To perform the upgrade you must purchase the license for the NS v2 Professional. With the included license key you can click on the blue scanhead image in the left corner and select About from the dropdown, where you can then upgrade the scanhead from the Upgrade License box (see below).

 

...

High power is a fairly indistinct term that means different things in different contexts. High power laser beams are handled by using reflective materials, and the level of reflectivity is dependent on the wavelength of the laser light.

Simple NanoScan/BeamScan Measurements of
Laser Diode Beams Produces Astigmatism Data

Astigmatism measurements of laser diodes, optical elements, and/or other sources can be made quickly and easily using a NanoScan/BeamScan. For example, by simply focusing the beam from a laser diode onto the profiler and measuring the distance between primary and secondary foci, an indication of source astigmatism is readily obtained. However, since this distance is on the order of 10 microns (μm), longitudinal magnification can be...

水銀、重水素、キセノン、クオーツハロゲンランプなどの従来のブロードバンド光源が、今は多くの工業用LEDに置き換わっています。

従来からブロードバンド光の測定はラジオメーターやフォトメーターで行われていました。校正されたフォトダイオードセンサでのLEDパワー測定と放射照度測定については詳細をご参照ください。

アプリケーション例としてLED 低コスト検査プロセスの設計についてご紹介します。

パイロエレクトリックセンサを初めてご使用になる時に、センサのダメージスレッルドを予めテストするためのテストプレートが商品に付属しています。ご購入頂いたパイロエレクトリックセンサと同じコーティングが施されています。ご不明点は弊社まで info@ophirjapan.co.jp までご遠慮なくお問合せください。

Pages