LabVIEW COM Demo

Description: 

LabVIEW COM Demo zeigt die USB-Kommunikation mit den Ophir Geräten in der LabVIEW Umgebung. Durch die Nutzung unseres neuen COM-Objekts (verteilt mit StarLabv 2.10 und höher) kann dieses Paket die Steuerung von Centauri, StarBright, StarLite, Juno, Juno+, Vega, Nova II, Pulsar and USBI Geräten übernehmen.

 
LabVIEW COM Demo bietet:

  • Eine voll funktionsfähige Demo-Anwendung
  • Eine Blockdiagramm-Struktur, die einfach zu verstehen ist und dem Endanwender die Basis für alle Anpassungen liefert.

Da es eine voll funktionsfähige Anwendung ist, kann sich der LabVIEW Programmierer komplett auf seine Anwendung konzentrieren ohne sich um Kommunikationsdetails kümmern zu müssen. 

 

Anmerkung:
LabVIEW COM Demo nutzt das Ophir COM Object, das in StarLab integriert ist. Nach dem Download und der Installation von StarLab wird LabVIEW COM Demo in der Unterverzeichnis Automation Examples von StarLab installiert. Um StarLab herunterzuladen, klicken Sie auf den Download Button.

 

Download StarLab

Specification

FAQ

How can I interface my Ophir Power Meter (Starbright, StarLite, Juno, USBI, Pulsar, NOVA II, Vega, USBI) to LabVIEW?

For customers using the new LabVIEW COM Demo, there is nothing additional to do. Just open it and get started. If writing your own LabVIEW application, make sure that the OphirLMMeasurement COM Object is included in your LabVIEW application

For customers using the legacy OphInstr LabVIEW package, ensure that NI Visa 4.6.2 or higher (from National Instruments) is installed on the PC.

Close

I see that you have several LabVIEW packages. What is the difference between them?

Libraries for Nova and LaserStar were developed in LabVIEW 6.1. They have been tested and found compatible with LabVIEW 7.0 and LabVIEW 8.6.1 as well.

The library for Nova-II, Vega, USBI, and Juno support (OphirInstr) was developed in LabVIEW 8.6.1 and has been tested with NI-VISA 4.6.2. It also includes support for the Single Channel LaserStar. This has been tested in LabVIEW 2009 as well. 

The library for Pulsar support (DemoForPulsar) was developed in LabVIEW 7.0 and tested in LabVIEW 8.6.1 as well.

The new LabVIEW COM Demo that supports the Juno, Vega, Nova-II, Pulsar, and USBI devices was developed in LabVIEW 8.6.1 and has been tested in LabVIEW 8.6, LabVIEW 2009 and LabVIEW 2013 as well.

Close