Beam measurement - New products

Compact, Lightweight Design Features Patent-Pending Passive Cooling Cartridge; No Water or Fan Cooling Required

Andover, MA – Feb 23, 2022 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir F150(200)A-CM-16 thermal sensor, a state-of-the-art device for measuring high repetition rate lasers with very short pulses in the nano, pico, and femto second ranges.

Andover, MA – November 17, 2020 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® Wide Beam Imager SWIR (WB-I SWIR), a compact, calibrated optical system for measuring the size and power distribution of large and divergent beams of VCSELs and LEDs in the SWIR range (900 - 1700nm).

Andover, MA – September 14, 2021 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® F80(120)A-CM-17, a state-of-the-art thermal sensor for measuring high repetition rate lasers with very short pulses in the nano, pico, and femto second ranges.

Andover, MA – January 27, 2021 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® Ariel, a self-contained, ultra-compact laser power meter for measuring high power industrial lasers up to 8KW.

Andover, MA – September 23, 2020 – MKS Instruments, Inc. (NASDAQ: MKSI) has announced the Ophir® Wide Beam Imager (WB-I), a compact calibrated optical system for measuring the size and power distribution of large and divergent beams of VCSELs, LEDs, edge emitting lasers, and fiber lasers. The Wide Beam Imager device is capable of imaging any beam shape (round, line, or square) that is too large for a camera sensor.

Andover, MA – February 5, 2020 – MKS Instruments, Inc (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® PE50U-DIFH-C Pulse Energy Sensor at SPIE Photonics West 2020.

Andover, MA – October 28, 2019 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® LBS-300HP-NIR Beam Splitter for high power NIR lasers. The LBS-300HP-NIR is a compact device that can deliver extremely high power density attenuation, up to 15MW/cm2 at 5kW.

Andover, MA – July 22, 2019 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® 16K-W High Power Laser Sensor, a compact sensor for measuring very high power lasers.

Andover, MA – June 25, 2019 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® Juno+ USB Interface at Laser World of Photonics. A smart, compact USB module, the Juno+ turns a PC or laptop into a full laser power/energy meter.

Andover, MA – February 5, 2019 MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced at SPIE Photonics West Ophir® BeamWatch® Integrated, a fully automated, non-contact laser measurement system designed to measure critical beam parameters in industrial production environments.

Andover, MA – February 6, 2019 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced at SPIE Photonics West the Ophir® Fast Photo Diodes, high speed, biased PIN photodiode detectors for viewing and measuring pulsed lasers and VCSELs.

Andover, MA – August 14, 2018 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced new additions to the Ophir® NanoScan™ 2s line of high power, scanning slit laser beam profilers.

Andover, MA – May 23, 2018 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® PD300-MS microscope slide power meter for accurate measurements of light emitted from fluorescence microscopes.

Andover, MA – January 22, 2018 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® Focal Spot Analyzer, a laser beam monitoring system that measures the focus spot and power of high power lasers in real time.

Andover, MA – November 20, 2017 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® BeamWatch® AM, the industry's first non-contact laser beam monitoring system for additive manufacturing.

Munich, Germany – June 26, 2017 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced a new line of high damage threshold laser power/energy sensors designed for CW lasers with high power densities, as well as long as for pulse lasers.

Andover, MA, May 31, 2017 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the Ophir® Pyrocam™ IV USB, a laser beam profiling camera that allows users to see their laser beam for dynamic alignment and proper operation.

Andover, MA, April 18, 2017 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced the 15K-W-BB-45 from Ophir®, a compact, water-cooled, thermal laser power measurement sensor that handles very high powers up to 15,000W.
 

San Francisco, CA, February 1, 2017 – MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, announces new additions to the Ophir® Integrating Sphere seriesof products.

October 11, 2016 – North Logan, UT – Ophir Photonics Group, a Newport Corporation company celebrating 40 years of excellence as the global leader in precision laser and LED measurement equipment, has announced the F50A-BB-18 thermal power/energy laser measurement sensor. Designed for continuous use at higher laser powers, the F50A-BB-18 is a compact, fan-cooled sensor with a wide dynamic range. It measures powers from 10mW to 50W and energies from 6mJ to 50J. The sensor includes a spectrally flat BB (broadband) coating, usable from far UV to far IR.

May 2, 2016 – North Logan, UT – Ophir Photonics Group, a Newport Corporation company celebrating 40 years of excellence as the global leader in precision laser measurement equipment, has announced the BC20-V1 laser sensor for measuring the power of scanned or intermittent beams. The BC20-V1 is a photodiode sensor that measures any wavelength over the spectral range of 400 – 1100nm.

December 7, 2015 - North Logan, UT – Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation company, today announced four new thermal laser sensors designed for measuring high pulse energies without the need for large, water-cooled devices. Designed for use with high powered lasers, the L40(150)A, L40(150)A-LP1, L50(150)A, and L30C-LP1-26-SH are compact sensors that measure high laser energies up to 8000J.

November 2, 2015 - North Logan, UT – Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation company, today announced the latest version of the company’s high power, scanning slit beam profiler, NanoScan™ 2s.

June 23, 2015 - Munich, Germany- Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation company, today announced at LASER World of PHOTONICS 2015 the StarBright laser power/energy meter, the most advanced of Ophir’s family of laser meters. StarBright is a feature-rich, handheld laser power/energy meter that measures power, single shot energy, repetitive energy, frequency, and beam size for the company’s wide range of thermal, pyroelectric, and photodiode laser sensors.

March 10, 2015 - North Logan, UT – Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation company, today announced the PD300RM Irradiance and Energy Density Sensor. The PD300RM is a calibrated irradiance and dosage sensor that measures narrowband LED and laser sources between 200 and 850nm. The sensor automatically adjusts to provide correct power and energy measurements based on the specific wavelength designated by the user. This delivers a more accurate reading than traditional radiometers.

February 12, 2015 - San Francisco, CA – Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation company, today announced at Photonics West the 120K-W Laser Power Meter, the only commercial sensor for measuring very high power 120kW lasers.

January 20, 2015 - North Logan, UT – Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the RM9 Radiometer, a sensor for measuring the power of very low level CW or quasi CW sources. The RM9 uses a pyroelectric sensor in conjunction with an 18Hz chopper to measure a wide range of radiation, from UV to deep IR. Unlike other more expensive radiometers, the RM9 is calibrated over the entire range of wavelengths, from 0.15μm to 12μm, not just a single wavelength.

November 24, 2014 - North Logan, UT – Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the 1000WPBB- 34 High Power Water Cooled Thermal Sensor, part of the company’s line of high damage threshold laser power sensors.

October 14, 2014— North Logan, UT – Ophir Photonics Group, the global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the F-PE80BF-DIF-C, the newest member of Ophir’s PE-C line of pyroelectric pulsed sensors – compact devices that provide the industry’s lowest measurable

August 18, 2014 — North Logan, UT— Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the LBS-400 Beam Splitters, a family of laser beam samplers that control and adjust beam output power that reaches the beam profiling camera. The LBS-400 samplers are the largest, dual-wedge attenuators on the market.

July 21, 2014— North Logan, UT— Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the Pyrocam™IVs, the newest member of the Pyrocam ™ family of pyroelectric laser beam profiling cameras. The Pyrocam IVs is the next generation of the popular Pyrocam III.

February 6, 2014 - San Francisco, CA— Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the newest version of BeamGage® at PhotonicsWest 2014. BeamGage 6.1 is a state-of-the-art beam profiling system that performs extensive data acquisition and analysis of laser beam parameters, such as beam size, shape, uniformity, divergence, mode content, and expected power distribution.

February 4, 2014 — San Francisco, CA—Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, has announced the newest member of the BeamTrack family, the 1000W-BB-34-Quad, at PhotonicsWest 2014. BeamTrack is a series of compact, multi-function thermal detectors that measure laser power, energy, beam position, and in some models beam size, in one device. The Beam- Track family includes the previously announced 3W, 10W, 50W, 150W, and 250Wdetectors.

January 6, 2014 - North Logan, UT— Ophir Photonics, global leader in precision laser measurement equipment and a Newport Corporation brand, today announced the addition of a more damage resistant coating to the company’s high power laser sensors in the 300Wto 1500Wrange. The L300W-LP, FL400A-LP, 1000WLP, and L1500W-LP now feature the improved LP1 absorber. Designed for continuous power and long >1ms pulses, this coating provides a damage threshold of 2X higher than competitive models.