Manuals

The Ophir Centauri is a microprocessor-based laser power/energy meter with single and dual channel options that provides a broad range of measurements, displays, and data handling options. ...

The Centauri is equipped with a 7" full color touch screen. Sensor parameters can be updated with a few taps on the screen. In addition, the Channel Options menu, reached by tapping ...

Ophir devices (Ariel, Centauri, StarBright, StarLite, Juno, Juno+, Vega, Nova II, Pulsar) can also be used through a COM object control. This allows system integrators to integrate ...

The Ophir StarBright is a microprocessor-based Laser Power/Energy Meter that provides a broad range of measurements, displays, and data handling options. It operates with Thermopile, ...

The StarBright is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round ...

The Ophir Vega is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric ...

The Vega is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round enter ...

The Ophir Nova II is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric ...

The Nova II is equipped with “soft keys”. That is, the functions of the keys change as indicated by the legend above each key. It is also equipped with 4 navigation keys and a round ...

Ophir StarLite is a simple to use microprocessor-based Laser Power/Energy meter that operates with thermopile, pyroelectric and photodiode sensors. Laser position and spot size can ...

The StarLite is equipped with “soft keys.” That is, the functions of the keys change as indicated by the legend above each key. To connect sensor to the StarLite meter: Insert the 15 ...

To connect sensor to the LaserStar meter: Insert the 15 pin D type connector of the measuring sensor cable into the socket marked “Head Input” on the rear panel of the LaserStar meter. ...

The Ophir Laserstar is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric ...

The Nova is equipped with “soft keys.” That is, the functions of the keys change as indicated by the legend above each key. When the Nova is first switched on with a sensor attached, ...

The Ophir Nova is a microprocessor-based Laser Power/Energy Meter providing a broad range of measurements, displays, and data handling options. It operates with thermopile, pyroelectric ...

This manual describes how to operate the Ophir StarLab application with any of the compatible Ophir measuring devices

The EA-1 is an Ethernet Adapter intended for OEM customers. It is designed to work with standard or OEM Ophir smart-plug sensors using a D15 connector. The EA-1 supports Ophir thermopile, ...

The Helios sensor measures high power industrial lasers by measuring the energy of a short time exposure of the CW laser. The laser should be set to pulse from 0.1 to several seconds. ...

The Helios sensor measures high power industrial lasers by measuring the energy of a short time exposure of the CW laser. The laser should be set to pulse from 0.1 to several se ...

The Ariel measures high power industrial lasers of up to 8kW by measuring the energy of a short exposure to this power. The laser is set to deliver a pulse of from 0.05 to several seconds. ...