4X Beam Reducer

4X-Strahlreduzierer

Strahlreduzierer mit C-Mount Gewinde
Beschreibung: 

Der 4X-Strahlreduzierer ist ein Bilderfassungssystem, mit dem die Ebene 30cm vor dem Strahlreduzierer auf dem CCD Chip der Kamera abgebildet wird. Dabei wird das Bild um den Faktor 4 verkleinert und gleichzeitig invertiert. Der Strahlreduzierer wird mit den drei schraubbaren Abschwächern der Kamera bestückt.

Da die Intensität des Strahls durch die Fokussierung um das 16(4x4)-fache erhöht wird, ist es ratsam solch einen Strahl stärker abzuschwächen als den ursprünglichen Strahl.

Specification

  • 360nm-1100nm
  • C-mount
  • 30mJ per pulse for nanosecond pulses
  • Ø50mm
  • 4X
Need help finding the right beam profiler? Try our Beam Profiler Finder

Ordering

The 4X Beam Reducer is available with the following option:
  • 4X reimaging beam reducer

    SPZ17017

    Screw on beam reducer for beams in the wavelength region 360 - 1100nm that reimages the beam 30cm in front of the unit onto the CCD while reducing the beam size 4X. Entrance aperture is 50mm. Fits 4.5mm recess cameras only

    Angebot anfragen

Accessories

Customers that purchase the above items also consider the following items:
  • LBS-100 to 4X beam reducer adapter

    SPZ17029

    This adapter enables mounting of the LBS-100 beam splitter/attenuator assembly in front of the 4X beam reducer. The combined assembly can image large high power beams in one unit.

  • Beam splitter large wedge

    Beam splitter large wedge

    SPZ17018

    Wedge, UVFS, 44X32 mm, uncoated wedge housing mounts to 1/4” thread, 1/2” diameter laboratory rod (not included)

  • LBS-300 Attenuator
    The LBS-300s beam splitter attachment for C-mount, CS-mount, or Ophir mount cameras allow you to measure laser beams with diameters up to 15mm and powers ranging from 10mW to ~400W(1). The beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization
  • LBS-400 Attenuator
    The LBS-400 beam sampler attachment for Pyrocams and large format Beam Profilers allows measuring UV, NIR or IR wavelength laser beams with diameters up to 1 inch (25.4mm) and powers ranging from 10mW to ~500W(1). The output beam preserves the polarization of the original beam.
  • LBS-100 Attenuator
    The LBS-100 system that is not as compact as the LBS-300s above but has