150C-SH | OEM thermal and photodiode sensors | OEM Power Sensors - Ophir

150C-SH

7N77023
描述: 

零件号7N77023替代 零件号770233
150C-SH是一款热功率/能量激光测量传感器,具有安装螺纹及18mm孔径。独立使用时的功率测量范围为60mW - 5W,配合散热器使用时的功率测量范围高至60W。其能量测量范围是20mJ~100J。其具有频谱平坦的宽带涂层,频谱覆盖范围为0.19~20µm。

Specification

  • Ø18mm
  • 0.19-20µm
  • 60mW-150W
  • 20mJ-100J
  • 51 L x 51 W x 33 D (mm)
  • 20kW/cm² at 60W
  • 1.2 s
  • 0.3J/cm²
  • 10J/cm²
  • 150W for 1min free standing
  • N.A.
  • CE, China RoHS
Need help finding the right sensor? Try our OEM申请

FAQ

Sensor Finder does not find a match for my application. Is there the possibility to create an OEM sensor for my application?

Yes, we have the ability to rapid prototype standard OEM sensors to help with custom applications where an off the shelf sensor does not fill the requirement.

Was this FAQ helpful to you? yes no
Close

What is the dynamic range of OEM sensors?

In general, the dynamic range over a given range, i.e. the ratio of maximum useable power to minimum useable power of Ophir thermal OEM sensors is 40:1. If greater dynamic range is desired, Ophir OEM RS232 sensors are available with several selectable ranges.

Was this FAQ helpful to you? yes no
Close

Do I need to recalibrate my instrument? How often must it be recalibrated?

Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.

Was this FAQ helpful to you? yes no
Close

Calibration

 

Videos

Cooling of OEM Sensors: Heat Sinking Cooling of OEM Sensors: Heat Sinking
OEM Laser Power Meter and Sensor OEM Laser Power Meter and Sensor OEM Laser Power Meter and Sensor

In this video, Jimmy Green, Ophir OEM Specialist, explains how Ophir can solve laser measurement challenges if a solution cannot be found from the hundreds of products in our catalog.

Clarifications: Range selection, measurement duration Clarifications: Range selection, measurement duration Clarifications: Range selection, measurement duration

Sometimes, even experienced users of laser measurement equipment come across some issues that, although basic, need to be clarified. This video reviews 2 such issues.

In this video, you will learn some guidelines for making sure that a sensor has been provided with proper heat sinking so it does not get damaged.