LBS-100 Attenuator

LBS-100衰减器

中性密度滤光片和单光束光学取样系统的组合(激光功率高达~400W)
描述: 

The LBS-100 system that is not as compact as the LBS-300s above but has
larger aperture, and has versions for longer wavelengths. The system contains
the mounting frame, 1 wedge beam splitter and several attenuators. The exit end
of the LBS-100 is standard C mount thread so all our cameras can be mounted
to the frame. The wedge angle is 6.5 degrees to insure that the reflection from
the rear side will not enter the camera. The optical elements are flat to 1/4 wave
in the visible to ensure no distortion of the beam.

Specification

  • C-mount
  • LBS-100: 400nm-700nm LBS-100-YAG: 1064nm, LBS-100-IR: 10.6um
  • LBS-100: 100W/cm² CW . . . 6 kJ/cm² (1ms pulse) . . LBS-100-YAG: 500W/cm² CW, 30 kJ/cm² (1ms Pulse) . LBS-100-IR: 1000W CW (105 J/cm²) for R = 0.5%, 100W CW (104 J/cm²) for R = 5%
  • LBS-100: Uncoated, LBS-100-YAG: 1% at 1064nm, LBS-100-IR: 0.5% or 5% at 10.6um
  • LBS-100: Quartz, LBS-100-YAG: Quartz, LBS-100-IR: ZnSe
  • 23mm
Need help finding the right beam profiler? Try our Beam Profiler Finder

Ordering

The LBS-100 combination beam sampling and beam apsorption systems available with the following options.
  • LBS-100

    SP90061

    351nm to 700nm suggested wavelength range

    询问报价
  • LBS-100 YAG

    SP90057

    1064nm suggested wavelength range, 20W to 500W

    询问报价
  • LBS-100IR 0.5

    SP90058

    9µm to 11µm suggested wavelength range, 50W to 1kW(0.5%)

    询问报价
  • LBS-100IR 5.0

    SP90059

    9µm to 11µm suggested wavelength range, 0.4W to 100W(5.0%)

    询问报价

FAQ

What should be my Safety concerns while using LBS-100?

Regular laser safety precautions should apply. Please note, that the main incident beam will exit the LBS-100, refracted approximately 6.5°. Provision must be made to safely contain the transmitted beam by beam dump or power meter.

Was this FAQ helpful to you? yes no
Close

Can I use LBS-100 both for beam profiling and power measuring?

Yes, the main function of LBS-100 beam splitter is Beam profiling, however it allows simultaneous measurement of a beam transmitted thru wedge by power meter.

Was this FAQ helpful to you? yes no
Close

Support

Tutorials and Articles

Imaging UV light with CCD Cameras

Is it possible to image a UV laser with a Silicon Sensor CCD camera offered by Ophir-Spiricon? The answer is yes, but the direct UV light ablates Silicon CCD chips over time. The ablation is cumulative and depends on the intensity, the wavelength, and the duration of the light on the sensor. The best choice for imaging UV light without damage is to avoid directly imaging the beam on the CCD sensor by using an UV image converter... 阅读更多...

Integrated Solutions: Interconnecting Ophir Products and Accessories

The Concept: Ophir customers often need to connect different optical components together to create an optimal setup to best meet their needs. In order to do this, Ophir provides mutual interconnections between different Ophir products via adapters with various threads, designed to exactly fit required optical path distances for each device. This is an integrated solution, prealigned and ready to use. 阅读更多...

Accessories

Customers that purchase the above items also consider the following items:
  • LBS-100 filter set

    SP90141

    Replacement filter set

  • LBS-100 -YAG filter set

    SP90142

    Replacement filter set

  • LBS-100 to L11059 adapter

    SP90196

    Mount L11059 camera to LBS-100 attenuator

  • LBS-100 to 4X beam reducer adapter

    SPZ17029

    This adapter enables mounting of the LBS-100 beam splitter/attenuator assembly in front of the 4X beam reducer. The combined assembly can image large high power beams in one unit.