4X Beam Reducer

4X缩束器

超大光束适用的C型接口缩束器
描述: 

4X缩束器是成像系统,它将缩束器前方30cm位置上的平面成像于相机CCD传感器上,同时还将图像尺寸缩小4倍并反转图像。缩束器使用与相机一起配供的衰减器上的三个螺钉。因为缩束后,光束密度会增大4x4=16倍。

Specification

  • 360nm-1100nm
  • C-mount
  • 30mJ per pulse for nanosecond pulses
  • Ø50mm
  • 4X
Need help finding the right beam profiler? Try our Beam Profiler Finder

Ordering

The 4X Beam Reducer is available with the following option:
  • 4X reimaging beam reducer

    SPZ17017

    Screw on beam reducer for beams in the wavelength region 360 - 1100nm that reimages the beam 30cm in front of the unit onto the CCD while reducing the beam size 4X. Entrance aperture is 50mm. Fits 4.5mm recess cameras only

    询问报价

Accessories

Customers that purchase the above items also consider the following items:
  • LBS-100 to 4X beam reducer adapter

    SPZ17029

    This adapter enables mounting of the LBS-100 beam splitter/attenuator assembly in front of the 4X beam reducer. The combined assembly can image large high power beams in one unit.

  • Beam splitter large wedge

    Beam splitter large wedge

    SPZ17018

    Wedge, UVFS, 44X32 mm, uncoated wedge housing mounts to 1/4” thread, 1/2” diameter laboratory rod (not included)

  • LBS-300 Attenuator
    The LBS-300s beam splitter attachment for C-mount, CS-mount, or Ophir mount cameras allow you to measure laser beams with diameters up to 15mm and powers ranging from 10mW to ~400W(1). The beam sampler is designed so that the preferential polarization selection effect of a single wedge is cancelled out and the resulting beam image is polarization
  • LBS-400 Attenuator
    The LBS-400 beam sampler attachment for Pyrocams and large format Beam Profilers allows measuring UV, NIR or IR wavelength laser beams with diameters up to 1 inch (25.4mm) and powers ranging from 10mW to ~500W(1). The output beam preserves the polarization of the original beam.
  • LBS-100 Attenuator
    The LBS-100 system that is not as compact as the LBS-300s above but has