Laser Beam Analysis

Manual

BeamGage is a low cost, PC-based product for use in modern multi-core advanced Pentium-generation personal computers running Windows 7 or Windows 10 operating systems.

Manual

The Pyrocam IIIHR is a high performance, solid-state, pyroelectric camera that features a 12mm imager (160 x 160 pixels) and 16-bit A/D converter. This enables reliable measurement …

Manual

The Pyrocam IV is a high performance, solid-state, pyroelectric camera that features a large 25mm imager (320 x 320 pixels) and 16-bit A/D converter. This enables reliable measurement …

Manual

The Ophir-Spiricon, LLC Laser Beam Analyzer, BeamMic is a low cost, PC-based product for use in modern multi core advanced Pentium-generation personal computers running the Windows …

Manual

NanoScan2 is a PC-based instrument for the measurement and analysis of optical beam spatial profiles in accordance with ISO standards. Beam profiles are measured in accordance with …

Manual

BeamWatch is the laser industry’s first completely non-interfering beam monitoring system, which allows beam measurements without contacting the laser beam. Measurements are taken by …

Manual

The BeamWatch software interfaces with the BeamWatch family of products. BeamWatch enables users to see beam data collection in real time. Due to the real time nature users can see …

Manual

Center the beam in the BeamWatch Apertures. • The center of the entrance aperture is located 50mm from the crosshair mark on the top of the unit.

Manual

BeamWatch Integrated combines a non-contact beam profiler with a power sensor. The water cooling plate under the beam profiler maintains acceptable temperatures. The cooling plate also …

Manual

BeamWatch AM is the next version in Ophir-Spiricon’s family of non-interfering beam monitoring systems. Designed specifically for the additive manufacturing industry, BeamWatch AM …

Manual

Connect the data, power sensor cables, and the polyurethane tubing to their respective ports on the BeamWatch AM unit.

Manual

BeamCheckTM is a camera-based laser beam profiling system for SLS/SLM 3-D Additive Manufacturing systems. BeamCheck measures and produces a beam profile of the laser beam focused at …

Manual

It is recommended that users review this guide before setting up and using the BeamSquared system. This guide will assist users in becoming familiar with the M2 measurement theory as …

Manual

NanoModeScan is an accessory to the NanoScan family of laser beam profilers. It is a computer driven automated linear stage and data acquisition and analysis system. It is designed …

Manual

The Optical Camera Trigger is an optical sensor that detects pulsed light sources and generates an output to trigger a camera or similar device. It provides two types of outputs – TTL …

Manual

The Ophir-Spiricon model M²-200s is a precision instrument designed to measure the propagation characteristics of visible to near-visible laser beams. The M²200s may be purchased with …

Manual

ESP TRIGGER PROBE USER MANUAL

Manual

Getting Started with a Lumenera L11059 Camera in BeamGage,User Notes

Manual

ModeScan™1780 Laser Beam Profiler Installation and Operation Manual

Manual

1300nm Narrow Bandpass Filter for C-mount Cameras P/N SPZ08242 User Notes

Page 1 of 2
Contact Us illustration

Have questions? Require assistance?

Click below to to contact Ophir Photonics and we'll get back with you shortly.

Contact Ophir Photonics