BeamCheck is an integrated laser measurement system designed to measure critical laser beam parameters for laser-based additive manufacturing systems BeamCheck includes a CCD camera for spatial measurements and a NIST-traceable power sensor that will provide a complete analysis of the laser power density profile.
The camera is precisely located at the build plane so that an accurate power density model of the working laser beam can be made. A beam splitter directs a small percentage of the beam to the camera, while the majority of the beam is directed to the integrated power sensor. From these measurements an accurate beam spot size and power density can be derived.
Beam check measures:
- Focal spot size at the build plane
- Laser power at the build plane
- Laser power density at the build plane
- Changes in spot size & power density over time
Additive manufacturing has restructured how prototype, developmental and advanced design mechanical components are made. Direct Laser Melting, Selective Laser Sintering or 3D metal Printing is quickly becoming the standard for designs that could not be fabricated with traditional metal removing techniques. To create consistent, strong structures using laser-based additive manufacturing processes that meet flyable DOD standards or FDA requirements, the metallurgy must be consistent, and a laser beam of known dimension, power density and focal spot location is required. Quality 3D laser printed processes require a laser delivering the correct amount of power, distributed correctly and focused at the correct location. To insure consistent and structurally sound parts these parameters should be directly measured before and after any critical part is made.
- 0.1-600 Watts
- to >3MW/CM²
- 200mm- >400mm
- CE, UKCA, China RoHS
Fully integrated and NIST calibrated system including: LBS-300 beam splitter, SP928 camera, BeamGage Standard software, software license,FL600A-LP2-65 power meter and JUNO smart sensor to USB adaptor. User must supply the PC.Request a Quote
- BeamGage StandardBeamGage Standard is our full-function software with an extensive set of ISO quantitative measurement, our patented Ultracal™ algorithm for the highest accuracy measurements in the industry.
Ophir-Spiricon introduces BeamCheck, the laser additive manufacturing quality assurance measuring device.