Specifications
- Product Name10A-BB-16
- Absorber TypeBB - Broadband general purpose
- Aperture SizeØ16 mm
- Spectral Range0.19-11 µm
- Minimum Power10 mW
- Maximum Average Power10 W
- Minimum Pulse Energy6 mJ
- Maximum Pulse Energy2 J
- Response Time0.8 s
- Maximum Average Power Density28 kW/cm²
- Maximum Energy Density <100 ns0.3 J/cm²
- Maximum Energy Density 2 ms2 J/cm²
- CoolingConvection
- DimensionsØ65 x 34 mm
- Cable Length1.5 m
- CE ComplianceYes
- UKCA ComplianceYes
- China RoHS ComplianceYes
Resources & Downloads
Data Sheets
Low Power Thermal Sensors 10mW to 50W Datasheet(489.9 kB, PDF)
Catalogs
Power Sensors Catalog(11.2 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
Drawings & CAD
10A Drawing(189.1 kB, PDF)
Technical Notes
Absorption, Angle Dependence and Damage Graphs for Thermal Sensors(216.1 kB, PDF) 5 Situations Where Laser Performance Measurement is Necessary Effect of Ambient Conditions on Laser Measurements Setting Your Thermal Sensor up in Energy Mode for the Best Accuracy and Repeatability How Much of the Power Sensor Aperture Can My Laser Fill Up? Common Reasons for Thermal Sensor Damage or Out of Tolerance Conditions
Tutorials
Technical Articles
Related Products
Fiber Connector Adapters
These adapters allow for power measurement of connectorized fiber-optic cables. The sensor may need an additional mounting bracket to connect to these fiber adapters.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | 7Z08227SC Fiber Connector Adapter, Power and Energy Sensors | In Stock | ||||
 | 7Z08226ST Fiber Connector Adapter, Power and Energy Sensors | In Stock | ||||
 | 7Z08229FC Fiber Connector Adapter, Power and Energy Sensors | In Stock | ||||
 | 1G01236ASMA Fiber Connector Adapter, Power and Energy Sensors | 6 Weeks |
Thermal Sensor Cables
Order a cable of a different length along with the sensor to receive a cable other than the standard 1.5 m length.
Sensor Connector to BNC Adapter
The SH to BNC Adapter allows the connection of an Ophir sensor to a current or voltage measuring device for measurement of the raw sensor analog output. A current meter should be used for photodiode sensors. Current or voltage meters can be used for thermal sensors.
Extended Warranty for Sensor
Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
| Compare | Description | Drawings, CAD & Specs | Avail. | Price | ||
|---|---|---|---|---|---|---|
 | XWAR-SENSORExtended Warranty for Sensor |
