{"id":11517,"date":"2021-08-11T11:00:38","date_gmt":"2021-08-11T11:00:38","guid":{"rendered":"https:\/\/blog.ophiropt.com\/?p=11517"},"modified":"2024-02-29T11:36:56","modified_gmt":"2024-02-29T11:36:56","slug":"beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot","status":"publish","type":"post","link":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/","title":{"rendered":"BeamSquared\u00ae &#8211; Measurement of Long Rayleigh Range Lasers with Small Focal Spot"},"content":{"rendered":"\n<p>The development of remote<a href=\"https:\/\/www.ophiropt.com\/en\/s\/laser-micromachining\"> material processing<\/a> techniques requires increasing the accuracy of the process to permit creating smaller features. Laser systems, used for various industrial applications like material processing and micromachining, require small focal spots and at the same time, greater focal lengths. <\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Small focal spots and greater focal lengths at the same time <\/h4>\n\n\n\n<p>To achieve that, lasers systems combining larger beams, and lower  M<sup>2<\/sup>, combined with longer focal length lenses are used. This results in<br>smaller focal spots at longer distances from the laser and Rayleigh length, up to 20 meters.<br>A variety of single-mode fiber and solid-state lasers designated to meet the specifications of both a long-waist location and small focal spot size is now available on the markets. The laser systems require a new approach to<br> their beam analysis technique.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\"><a href=\"https:\/\/www.ophiropt.com\/en\/c\/beamsquared-m2-beam-analyzers\">BeamSquared\u00ae <\/a>&#8211;  Higher measurement accuracy<\/h4>\n\n\n\n<p>Beam Propagation and Caustic analysis of lasers with small focal spot and long Rayleigh range performed by <a href=\"https:\/\/www.ophiropt.com\/en\/c\/beamsquared-m2-beam-analyzers\">BeamSquared\u00ae<\/a> (BSQ) equipped with conventional focusing lenses of 400 \u2013 500 mm may not be ISO11146 Standard compliant due to pixel limitation of Beam Profiler camera. <\/p>\n\n\n\n<p>The limitation occurs if the measured beam covers an area on the camera sensor less than 20 pixels in diameter. Even when the beam waist diameter is larger than 20 pixels, more accurate measurement results are achieved when more pixels are covered. An additional parameter of ISO11146 defines that the caustic propagation measurement space should be at least 4 times the Rayleigh length of the laser.<\/p>\n\n\n\n<p>To support ISO11146 standard measurement of such lasers, longer focal length lenses with high focal length accuracy are required.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Ophir to the rescue! <\/h4>\n\n\n\n<p>Ophir now happy to introduce a set of lenses calibrated for accurate and repeatable propagation measurements of lasers having long Rayleigh length and small focal spot. <\/p>\n\n\n\n<table class=\"wp-block-table\"><tbody><tr><td>\n  Focal length\n  <\/td><td>\n  Description\n  <\/td><td>\n  PN:\n  <\/td><\/tr><tr><td>\n  750mm\n  <\/td><td>\n  UV AR 266nm-440nm \n  <\/td><td>\n  SP90554\n  <\/td><\/tr><tr><td>\n  1000mm\n  <\/td><td>\n  UV AR 266nm-440nm\n  <\/td><td>\n  SP90558\n  <\/td><\/tr><tr><td>\n  750mm\n  <\/td><td>\n  XNIR AR 1000nm-1550nm\n  <\/td><td>\n  SP90557\n  <\/td><\/tr><tr><td>\n  750mm\n  <\/td><td>\n  NIR AR 650nm-1000nm\n  <\/td><td>\n  SP90556\n  <\/td><\/tr><tr><td>\n  750mm\n  <\/td><td>\n  VIS AR 430nm-700nm\n  <\/td><td>\n  SP90555\n  <\/td><\/tr><tr><td>\n  1000mm\n  <\/td><td>\n  VIS AR 430nm-700nm\n  <\/td><td>\n  SP90559\n  <\/td><\/tr><\/tbody><\/table>\n\n\n\n<p>Read full article <a href=\"https:\/\/www.ophiropt.com\/en\/n\/long-rayleigh-range-lasers\">here<\/a><\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" width=\"800\" height=\"350\" data-src=\"https:\/\/blog.ophiropt.com\/wp-content\/uploads\/2021\/08\/VCSEL-4.png\" alt=\"\" class=\"wp-image-11527 lazyload\" data-srcset=\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4.png 800w, https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4-300x131.png 300w, https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4-768x336.png 768w, https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4-24x11.png 24w, https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4-36x16.png 36w, https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/VCSEL-4-48x21.png 48w\" data-sizes=\"(max-width: 800px) 100vw, 800px\" src=\"data:image\/svg+xml;base64,PHN2ZyB3aWR0aD0iMSIgaGVpZ2h0PSIxIiB4bWxucz0iaHR0cDovL3d3dy53My5vcmcvMjAwMC9zdmciPjwvc3ZnPg==\" style=\"--smush-placeholder-width: 800px; --smush-placeholder-aspect-ratio: 800\/350;\" \/><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":11525,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[321,3,323],"tags":[392],"ophirposttype":[349],"class_list":["post-11517","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industrial-applications","category-laser-beam-analysis","category-material-processing","tag-beamsquare","ophirposttype-blogpost-en"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.2 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics<\/title>\n<meta name=\"description\" content=\"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics\" \/>\n<meta property=\"og:description\" content=\"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\" \/>\n<meta property=\"og:site_name\" content=\"Ophir Photonics\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/OphirPhotonicsGroup\/\" \/>\n<meta property=\"article:published_time\" content=\"2021-08-11T11:00:38+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-02-29T11:36:56+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png\" \/>\n\t<meta property=\"og:image:width\" content=\"800\" \/>\n\t<meta property=\"og:image:height\" content=\"350\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"OphirBlog\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"OphirBlog\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\"},\"author\":{\"name\":\"OphirBlog\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#\/schema\/person\/d1146bd4d1105af2b2351f3e579b902b\"},\"headline\":\"BeamSquared\u00ae &#8211; Measurement of Long Rayleigh Range Lasers with Small Focal Spot\",\"datePublished\":\"2021-08-11T11:00:38+00:00\",\"dateModified\":\"2024-02-29T11:36:56+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\"},\"wordCount\":344,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png\",\"keywords\":[\"BeamSquared\"],\"articleSection\":[\"Industrial Applications\",\"Laser Beam Analysis\",\"Material Processing Application\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\",\"name\":\"BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics\",\"isPartOf\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png\",\"datePublished\":\"2021-08-11T11:00:38+00:00\",\"dateModified\":\"2024-02-29T11:36:56+00:00\",\"description\":\"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser\",\"breadcrumb\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png\",\"contentUrl\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png\",\"width\":800,\"height\":350},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.ophiropt.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"BeamSquared\u00ae &#8211; Measurement of Long Rayleigh Range Lasers with Small Focal Spot\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#website\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/\",\"name\":\"Ophir Photonics\",\"description\":\"Laser Measurement Blog\",\"publisher\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.ophiropt.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#organization\",\"name\":\"Ophir Photonics\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/MKS-Ophir_Linear_White-3.svg\",\"contentUrl\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/MKS-Ophir_Linear_White-3.svg\",\"width\":316,\"height\":57,\"caption\":\"Ophir Photonics\"},\"image\":{\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/OphirPhotonicsGroup\/\",\"https:\/\/www.instagram.com\/ophir_by_mks\/\",\"https:\/\/www.linkedin.com\/company\/ophir-optronics\/?viewAsMember=true\",\"https:\/\/www.youtube.com\/channel\/UCPvz0KXnZ5LWgO_HC5pO6ow?view_as=subscriber\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/#\/schema\/person\/d1146bd4d1105af2b2351f3e579b902b\",\"name\":\"OphirBlog\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg\",\"url\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg\",\"contentUrl\":\"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg\",\"caption\":\"OphirBlog\"},\"url\":\"https:\/\/www.ophiropt.com\/blog\/author\/ophirblog\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics","description":"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/","og_locale":"en_US","og_type":"article","og_title":"BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics","og_description":"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser","og_url":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/","og_site_name":"Ophir Photonics","article_publisher":"https:\/\/www.facebook.com\/OphirPhotonicsGroup\/","article_published_time":"2021-08-11T11:00:38+00:00","article_modified_time":"2024-02-29T11:36:56+00:00","og_image":[{"width":800,"height":350,"url":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png","type":"image\/png"}],"author":"OphirBlog","twitter_card":"summary_large_image","twitter_misc":{"Written by":"OphirBlog","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#article","isPartOf":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/"},"author":{"name":"OphirBlog","@id":"https:\/\/www.ophiropt.com\/blog\/#\/schema\/person\/d1146bd4d1105af2b2351f3e579b902b"},"headline":"BeamSquared\u00ae &#8211; Measurement of Long Rayleigh Range Lasers with Small Focal Spot","datePublished":"2021-08-11T11:00:38+00:00","dateModified":"2024-02-29T11:36:56+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/"},"wordCount":344,"commentCount":0,"publisher":{"@id":"https:\/\/www.ophiropt.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png","keywords":["BeamSquared"],"articleSection":["Industrial Applications","Laser Beam Analysis","Material Processing Application"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/","url":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/","name":"BeamSquared\u00ae - Measurement of Long Rayleigh Range Lasers with Small Focal Spot - Ophir Photonics","isPartOf":{"@id":"https:\/\/www.ophiropt.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage"},"image":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage"},"thumbnailUrl":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png","datePublished":"2021-08-11T11:00:38+00:00","dateModified":"2024-02-29T11:36:56+00:00","description":"The development of remote material processing techniques requires increasing the accuracy of the process to permit creating smaller features. Laser","breadcrumb":{"@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#primaryimage","url":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png","contentUrl":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2021\/08\/Untitled-design-2021-08-09T224700.399.png","width":800,"height":350},{"@type":"BreadcrumbList","@id":"https:\/\/www.ophiropt.com\/blog\/beamsquared-measurement-of-long-rayleigh-range-lasers-with-small-focal-spot\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.ophiropt.com\/blog\/"},{"@type":"ListItem","position":2,"name":"BeamSquared\u00ae &#8211; Measurement of Long Rayleigh Range Lasers with Small Focal Spot"}]},{"@type":"WebSite","@id":"https:\/\/www.ophiropt.com\/blog\/#website","url":"https:\/\/www.ophiropt.com\/blog\/","name":"Ophir Photonics","description":"Laser Measurement Blog","publisher":{"@id":"https:\/\/www.ophiropt.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ophiropt.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.ophiropt.com\/blog\/#organization","name":"Ophir Photonics","url":"https:\/\/www.ophiropt.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ophiropt.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/MKS-Ophir_Linear_White-3.svg","contentUrl":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/MKS-Ophir_Linear_White-3.svg","width":316,"height":57,"caption":"Ophir Photonics"},"image":{"@id":"https:\/\/www.ophiropt.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/OphirPhotonicsGroup\/","https:\/\/www.instagram.com\/ophir_by_mks\/","https:\/\/www.linkedin.com\/company\/ophir-optronics\/?viewAsMember=true","https:\/\/www.youtube.com\/channel\/UCPvz0KXnZ5LWgO_HC5pO6ow?view_as=subscriber"]},{"@type":"Person","@id":"https:\/\/www.ophiropt.com\/blog\/#\/schema\/person\/d1146bd4d1105af2b2351f3e579b902b","name":"OphirBlog","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg","url":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg","contentUrl":"https:\/\/www.ophiropt.com\/blog\/wp-content\/uploads\/2024\/03\/avatar-auth-154x154.jpg","caption":"OphirBlog"},"url":"https:\/\/www.ophiropt.com\/blog\/author\/ophirblog\/"}]}},"_links":{"self":[{"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/posts\/11517","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/comments?post=11517"}],"version-history":[{"count":0,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/posts\/11517\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/media\/11525"}],"wp:attachment":[{"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/media?parent=11517"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/categories?post=11517"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/tags?post=11517"},{"taxonomy":"ophirposttype","embeddable":true,"href":"https:\/\/www.ophiropt.com\/blog\/wp-json\/wp\/v2\/ophirposttype?post=11517"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}