USB Interface
USB Interface
Ophir Power/Energy Meters - PC Interfaces - USB Interface

Using the USB Interface, you can connect several heads to the PC by using one box for each head and if necessary, a USB hub.
Ophir basic smart head to USB interface for single channel turn your PC or laptop into a full fledged Ophir multi-channel laser power/energy meter. Just install the software, plug the head into the interface box and the USB cable from the box to the PC USB port.

The basic USB Interface operates with thermal, photodiode and pyroelectric heads and needs no external power. Just plug the smart head into the USB Interface and run a USB cable from the Interface to your PC or Laptop and your computer becomes a full-fledged laser power/energy meter. ActiveX and complete LabVIEW support included.

Ordering Info
Displays Catalog
Accessories
PC Applications
     PhotoNameFeatures  P/N 
      
 Ophir Laser Measurement Instruments: Displays - USBI InterfaceUSBI
USB Interface		Module to operate one or several heads from your PC USB port, by using one box for each head and if necessary, a USB hub. Max repetition rate for every pulse- 2KHz.  7Z01200 
Ophir's Laser Measurement Group provides a complete line of laser measurement instrumentation including laser power meters. Displays Catalog Catalog - Smart Displays and Computer Connectivity
Displays Catalog
pgs. 74-91 (1.14MB)
N.A.
     PhotoNameFeatures 
     
 Ophir Laser Measurement Instruments: PC Application - PC Software & Drivers PC Software & Drivers
This section describes various ways to interface the USBI to your PC as  well as the software options available. You have USBI-StarLab software as well as Active X and LabView options. The section also describes software solutions for system integrators.
     
 Ophir Laser Measurement Instruments: PC Application - LabView LabView VIs gives a complete measurement interface with Ophir's Nova, LaserStar (both single and dual-channel), USBI, Nova II and Vega.
     
 Ophir Laser Measurement Instruments: PC Application - USBI USBIThe Ophir Smart Head with USB interface turns your PC or laptop into a full-fledged Ophir multichannel laser power/energy meter. Now supports all Ophir laser power/energy heads. Up to 8 heads can be displayed at once on one PC. By using the Ophir ActiveX control, you can control the USBI, Nova II, Vega and Pulsar-1/2/4 devices from your own application.
     
 Ophir Laser Measurement Instruments: PC Application - Firmware FirmwareEmbedded Software for USB Interface

USBI firmware (version 1.42)
 
   Webmaster   Contact Us   Site Map
Copyright © 2008 Ophir-Spiricon Inc.