Ophir Power/Energy Meters - Smart Heads - Photodiode Heads

Photodiode Sensors
Ophir's Photodiode PD-300 series sensors offer spectral coverage from 200nm – 1800nm, and automatic background subtraction so the measurement is not sensitive to room light.
All models have wavelength calibration built into the system.

Ophir Power/Energy Meters - Smart Heads - Pyroelectric & Photodiode Energy Heads
Pyroelectric Laser Energy Sensors
Ophir pyroelectric laser energy sensors use innovative, patented technology which facilitates accurate and repeatable measurements over an extensive range of conditions.
Ophir Power/Energy Meters - Smart Heads - Thermal Heads - Low Power

Thermal (Thermopile) Sensors - Low Powers to 50W
Ophir has the widest selection of laser power sensors for low average powers in the industry. From the popular 3A series that can reliably measure down to tens of micro watts and micro joules to the L50A for up to 50W continuous

Ophir Power/Energy Meters - Smart Heads - Thermal Heads - Medium Power
Thermal (Thermopile) Sensors - Medium Powers to 300W
Ophir has a wide range of thermal laser measurement sensors. Included are the exclusive LP1 coating with the highest damage thresholds available for long pulses and continuous radiation. There are sensors with apertures up to 65mm diameter.
Ophir Power/Energy Meters - Smart Heads - Thermal Heads ג€“ High Power
Thermal (Thermopile) Sensors - High Powers 500W to 10,000W
Ophir's high power sensors are the most reliable and durable. Included are the exclusive 10K-W sensor withstanding power densities 10KW/cm² at 10KW power level, and the FL500A fan cooled sensor for up to 500 Watts.
Ophir Power/Energy Meters - Smart Heads - Comet Portable Power Probes
Comet Portable Power Probes
The low cost Comet power probes are perfect for laser job shops. They give simple
and accurate power measurements up to 10KW and 10KW/cm2
Ophir Power/Energy Meters - Smart Heads - Special Photodiode Products

Ophir has special photodiode products for special applications: the low cost PD200 sensor and power meter for those who only want to measure one or two wavelengths. The FPS-10 to measure temporal pulse shape and the WaveStar spectrum analyzer.

Ophir Power/Energy Meters - Smart Heads - RP Heads
RP Sensors for pulsed lasers 30mW - 1500W, 10mJ - 100J, up to 15000 Hz.
Especially for high rep rate, high average power lasers.
Ophir Power/Energy Meters - Smart Heads - Laser Spectrum Analyzer

The Ophir WaveStar introduces a new level of accuracy and ease in spectral measurements. Just plug into your PC parallel port, install the software and easily and accurately measure spectra from a wide variety of sources including continuous and pulsed sources from microwatts to watts in intensity. The program automatically tags the peaks with the wavelength so the result is readily available.
 CCD Laser Spectrum Analyzer
Download the WaveStar software

Ophir Power/Energy Meters - Smart Heads - Integrating Spheres

Ophir offers several integrating sphere smart sensors for measurement of divergent beams and diode lasers 1µW-100W

Ophir Power/Energy Meters - Smart Heads - Graphs

Spectral Graphs & Absorption
Approximate Spectral Absorption of Absorbers

Pyroelectric and Excimer Heads
Thermal Heads
Pyroelectric Heads