Quasar – Wireless Interface
The Quasar module provides a way to use Ophir sensors as a remote laser power/energy meter allowing optimum placement of the sensor and separate optimum placement of your PC or laptop with no connecting cables.
Quasar table model connects to all standard Ophir sensors and broadcasts to your PC
Quasar Reader App - turns your Android based smart phone into a laser power meter!
pgs. 98-107 (587 KB)
Starlab User Guide
Quasar Reader User Guide
Ophir Photonics laser power meters and PC interfaces works on the smart plug interface allowing any Ophir meter to work with most Ophir laser measurement instruments. Quasar is a wireless laser measurement instrument that connects straight from your measuring sensor to your laptop or PC with no cables to provide a remote laser energy meter.
|PC Software & Drivers
||This section describes various ways to interface the Quasar to your PC as well as the software options available.|
|StarLab||The StarLab application together with the Quasar wireless PC interface turns your PC or laptop into a full-fledged Ophir laser power/energy meter. The Quasar supports most Ophir sensors. Multiple sensors can be displayed at once on one PC.|
|Firmware||Embedded Software for Quasar Interface
Latest Quasar firmware (version 1.25)
Use StarLab to upgrade the firmware of your device. Press Here for step-by-step instructions.
|Quasar Reader App||Quasar reader turns your Android based smartphone into a portable Ophir laser power measurement monitor. It works with Ophir Thermopile and Photodiode based sensors that are attached to a Quasar.|