Ophir’s 1-4 channel Pulsar interface turns your PC or laptop into a full fledged Ophir multi-channel laser power/energy meter. Just install the software, plug the sensor into the Pulsar and the USB cable from the Pulsar to the PC USB port. With the Pulsar-4, Pulsar-2 and Pulsar-1 series, you can connect up to 4 sensors to each module, monitor each pulse at up to 25KHz and utilize external trigger.
pgs. 98-107 (587 KB)
Starlab User Guide
Ophir Photonics laser power meters and PC interfaces works on the smart plug interface allowing any Ophir meter to work with most Ophir laser measurement instruments. The Pulsar connect up to four laser sensors to your laptop or desktop PC .
|Pulsar USB cable||USB-A to B cable (1 unit supplied with Pulsar)||7E01202|
|PC Software & Drivers
||This section describes various ways to interface the Pulsar to your PC as well as the software options available.|
|StarLab||The StarLab application together with the Pulsar turns your PC or laptop into a full-fledged Ophir laser power/energy meter. Supports all Ophir laser power/energy sensors. Up to 8 sensors can be displayed at once on one PC. By using the Ophir COM objects, you can control the StarLite, Juno, USBI, Nova II, Vega and Pulsar-1/2/4 devices from your own application.|
|LabView||Library supplied for a complete measurement interface with most of our USB speaking devices (StarLite, Juno, Nova-II, Pulsar, USBI, Vega). Makes use of our new COM object.