English
日本語
中文
Deutsch
русский
- Power Sensors
- Energy Sensors
- BeamTrack Sensors
- Laser Power Meter
- PC Interfaces
- OEM Products
- New Products
- Software
- Beam Dumps
- Sensor Finder
- Meter Finder
- FAQs
- Distributors
- Calibration
- Repair (RMA)
- Catalogs
- Manuals
- Special Requirements
- Support Request Form
- Tutorials
- Publications
- Applications
- Tech Tips
- Videos
- Links
OEM Power Sensors
| Ophir pioneered the compact self-contained laser power meter sensors with built-in amplifiers. These sensors are easy to install and give a calibrated voltage, proportional to power. They contain all the electronics needed including a speed up circuit to increase the speed of response of the sensor to the order of 1s, 0-95%. Connections to the sensor are simple with the host providing DC power and the sensor providing a voltage output proportional to power. The new UA series is microprocessor based and can be configured to give power or energy readings in a variety of ways. |
 |
 OEM Products (1.23 MB) |
Ophir Photonics OEM Power Sensors are compact self-contained laser power meter sensors with built-in amplifiers. These laser power sensors are easy to install and give a calibrated voltage, proportional to power. The laser power measurement sensors contain all the electronics needed including a speed up circuit to increase the speed of response of the sensor to the order of 1s, 0-95%.
| Photo | Name | Features | P/N | ||
 |
Beam Splitter |
Beam splitter for PE and Thermal sensors | 7Z17001 | ||
 |
Replacement Window for Beam Splitter |
Replacement Window for Beam splitter | 7F01075 | ||
 |
SH to BNC Adapter | Allows connection of smart sensors to voltage measuring device for measurement of raw voltage output | 7Z11010 |
| Photo | Name | Features | P/N | ||
 |
Vega |
Vega color universal smart sensor display for thermal, pyroelectric and photodiode sensors | 7Z01560 | ||
 |
Nova II |
Nova II universal smart sensor display for thermal, pyroelectric and photodiode sensors | 7Z01550 | ||
 |
Nova |
Nova universal smart sensor display for thermal, pyroelectric and photodiode sensors. For the "Nova PE-C Adapter" allowing the Nova to operate with Pyroelectric PE-C series sensors press here. | 7Z01500 | ||
 |
StarLite |
StarLite low cost laser power meter for all standard Ophir Thermal, BeamTrack, PE-C Pyroelectric and Photodiode sensors | 7Z01565 | ||
 |
LaserStar Single Channel |
Laserstar single channel universal smart sensor display for thermal, pyroelectric, photodiode and RP sensors | 7Z01600 | ||
|
LaserStar Dual Channel |
The dual channel model enables user to measure two channels independently, or the ratio or difference between them in real time. | 7Z01601 | ||
 |
Pulsar 4 |
Fast 4 channels Pulsar with external trigger | 7Z01201 | ||
 |
Pulsar 2 |
Same as above but for 2 channels only | 7Z01202 | ||
 |
Pulsar 1 |
Same as above but for single channel | 7Z01203 | ||
 |
USB Interface |
Module to operate one Ophir smart sensor from your PC USB port. Comes with a software. Max rep rate for every pulse- 2KHz | 7Z01200 | ||
 |
Juno |
Compact USB Interface that turns your PC into an Ophir power & energy meter | 7Z01250 | ||
 |
Quasar |
Quasar bluetooth wireless smart sensor to PC interface | 7Z01300 |
Back to All Laser Measurement
Back to All Laser Power Energy Meters