English
日本語
中文
Deutsch
русский
- Power Sensors
- Energy Sensors
- BeamTrack Sensors
- Laser Power Meter
- PC Interfaces
- OEM Products
- New Products
- Software
- Beam Dumps
- Sensor Finder
- Meter Finder
- FAQs
- Distributors
- Calibration
- Repair (RMA)
- Catalogs
- Manuals
- Special Requirements
- Support Request Form
- Tutorials
- Publications
- Applications
- Tech Tips
- Videos
- Links
Products
Support
Knowledge Center
Laser Pyroelectric Energy Sensors
| Pyroelectric Laser Energy Sensors – 0.2µJ to 10J |
Ordering Info
Sensor Catalog
Accessories
Related Items
 |
 Energy sensors pgs. 61-84 (2.1 MB) |
Laser energy sensors including laser pyroelectric type sensors are useful for laser measurement of the energy of pulsed lasers.
| Photo | Name | Features | P/N | ||
 |
Nova PE-C Adapter |
The adapter plugs between the Nova D15 socket and the smart plug of the PE-C sensor to allow the Nova to operate with PE-C series sensors. See PE-C spec sheet for details. | 7Z08272 | ||
 |
Heat Sink |
Heat sink that screws onto rear of PE-C series sensors allowing working at over 50% higher average powers | 7Z08267 | ||
 |
Fiber Adapter |
Fiber Adapter for Pyroelectric sensors | |||
 |
IR Laser Phosphor Glass |
For visualizing spectral region 810-860nm, 900-1100nm and 1500-1600nm |
7F01235A | ||
 |
Shock Absorbing Mounting Post |
Post with rubber encased thread to isolate sensor from vibration and prevent false triggering at low energy levels | 7Z08268 | ||
 |
Beam Splitter |
Beam splitter for PE and Thermal sensors | 7Z17001 | ||
 |
Replacement Window for Beam Splitter |
Replacement Window for Beam splitter | 7F01075 | ||
 |
Scope Adapter |
Plugs between the PE sensor and display | 1Z11012 | ||
 |
 PE-C to PE Size Adapter |
Size adapter to allow using the PE-C type sensors in jigs and setups that were originally designed for PE sensors | 7Z08273 | ||
 |
PE Test Plates |
Damage threshold test plates for metallic or BF coated sensors | PE: 7E06031A BF: 7E06031D |
||
 |
Ferrite Choke | Ferrite Choke to install on sensor cable near sensor to reduce electromagnetic interference in situations of high EMI | 7H04014 |
| Photo | Name | Features | P/N | ||
 |
Vega |
Vega color laser power / energy meter for thermal, pyroelectric and photodiode sensors | 7Z01560 | ||
 |
Nova II |
Nova II laser power / energy meter for thermal, pyroelectric and photodiode sensors | 7Z01550 | ||
 |
Nova |
Nova laser power / energy meter for thermal, pyroelectric and photodiode sensors. For the "Nova PE-C Adapter" allowing the Nova to operate with Pyroelectric PE-C series sensors press here. | 7Z01500 | ||
 |
StarLite |
StarLite low cost laser power / energy meter for all standard Ophir Thermal, BeamTrack, PE-C Pyroelectric and Photodiode sensors | 7Z01565 | ||
 |
LaserStar Single Channel |
Laserstar single channel laser power / energy meter for thermal, pyroelectric, photodiode and RP sensors | 7Z01600 | ||
|
LaserStar Dual Channel |
The dual channel model enables user to measure two channels independently, or the ratio or difference between them in real time. | 7Z01601 | ||
 |
Pulsar 4 |
Fast 4 channels Pulsar with external trigger | 7Z01201 | ||
 |
Pulsar 2 |
Same as above but for 2 channels only | 7Z01202 | ||
 |
Pulsar 1 |
Same as above but for single channel | 7Z01203 | ||
 |
USB Interface |
Module to operate one Ophir smart sensor from your PC USB port. Comes with a software. Max rep rate for every pulse- 2KHz | 7Z01200 | ||
 |
Juno |
Compact USB Interface that turns your PC into an Ophir power & energy meter | 7Z01250 | ||
 |
Quasar |
Quasar bluetooth wireless smart sensor to PC interface | 7Z01300 |
Back to All Laser Measurement
Back to All Laser Power Energy Meters