SP620U - USB Silicon CCD Cameras

USB Silicon CCD Cameras
  • USB 2.0 compatible
  • 64dB true system dynamic range - highest in the industry
  • Programmable high speed electronic shutter
  • Spectral range: 190 - 1320nm
  • Gain adjustable to accommodate a wide range of input levels
  • Built in optical trigger synchronizes with even the shortest laser pulses.
  • Slim profile and multiple mounting options
  • Available with BeamGage or BeamStar software
Description
Specifications
Ordering Info
Catalog/Manual
USB Cameras for use with Laptop or Desktop PC
Item Specification
Model SP620U
Application 1/1.8" format, high resolution, wide dynamic range, pulsed lasers, CW YAG, adjustable ROI
Spectral Response 190 - 1320nm(2)
Maximum beam size 7.1mm W x 5.4mm H
Pixel spacing 4.40µm x 4.40µm
Number of effective pixel 1600 x 1200
Minimum system dynamic range 62 dB
Linearity with Power ±1%
Accuracy of beam width ±2%
Frame rates: In 12 bit mode 7.5 fps at full resolution
28 fps at 640x480
44 fps at 320x240
Shutter duration 30us to multiple frame times
Gain control 29:1 automatic or manual control
Trigger
  1. BNC connector accepts positive or negative trigger. LED on camera indicates triggering. Will synchronize with laser repetition rates up to 1KHz. Built in pre-trigger allows synchronization to even sub-nanosecond pulses.
  2. Same connector can provide trigger out to synch laser. Supports programmable delay on Strobe Out
  3. Same connector accepts photodiode trigger (see below)
Photodiode trigger Optional photodiode trigger available: P/N SPZ17005
Saturation intensity 1 2.2µW/cm2
Lowest measurable signal 1 2.5nW/cm2
Damage threshold 50W/cm2 / 0.1J/cm2 with all filters installed for <100ns pulse width(3)
Dimensions and CCD recess 96mm x 76mm x 23mm CCD recess: 4.5mm below surface
Image quality at 1064nm Pulsed with trigger synch - excellent
Pulsed with video trigger - good
CW - good
Operation mode Interline transfer progressive scan CCD
Software supported BeamGage, LBA and BeamStar
PC interface USB 2.0
  1. Camera set to full resolution at maximum frame rate and equivalent exposure times, running CW at 632.8nm wavelength. Camera set to
    minimum useful gain for saturation test and maximum useful gain for lowest signal test.
  2. May be useable for wavelengths below 350nm but sensitivity is low and detector deterioration may occur. Therefore UV image converter is
    recommended. For operation at 1300nm sensitivity is low and short wavelength blocking filter SPZ08242 is recommended.
  3. This is the damage threshold of the filter glass of the filters. Assuming all filters mounted with ND1 (red housing) filter in the front. Distortion of
    the beam may occur with average power densities as low as 5W/cm2

Cameras are part of a Laser Beam Analysis System
The camera and software are sold as a package

     ItemDescriptionP/N 
   
BeamGage Standard USB2 Beam Profiler Systems (camera and software)  
     
  BGS-USB-SP620 BeamGage Standard software, software license, 1/1.8” format 1600x1200 pixel camera with 4.5mm CCD recess. Comes with USB and cable and 3 ND filters SP90199  
 
     
BeamGage Professional USB2 Beam Profiler Systems (camera and software)  
     
  BGP-USB-SP620 BeamGage Professional Edition software, software license, 1/1.8” format 1600x1200 pixel camera with 4.5mm CCD recess. Comes with USB cable and 3 ND filters. SP90238  
     
BeamGage Enterprise USB2 Beam Profiler Systems (camera and software)  
     
  BGE-USB-SP620 BeamGage Enterprise Edition software, software license, 1/1.8” format 1600x1200 pixel camera with 4.5mm CCD recess. Comes with USB cable and 3 ND filters. SP90248  
     
USB2 Beam Profiler Systems (camera and software)  
     
  BS-USB-SP620 BeamStar software, software license, 1/1.8” format 1600x1200 pixel camera with 4.5mm CCD recess. Comes with USB cable and 3 ND filters SP90155  
 
     
  PC Accessories for Cameras  
     
  USB A-B Cable USB Cable with A to B connectors, 5 meter length SP90204  
     
  USB A-mini B Cable USB Cable with A to mini-B connectors, 5 meter length SP90205  
     
  Optical Synch for Pulsed Lasers  
     
  Optical Trigger for FX and SP Cameras Optical trigger assembly which can be mounted on camera or separately to sense laser pulses and synchronize FX and SP cameras with pulses. Comes with a BNC cable to for mounting on camera and a stand for mounting separately. SPZ17005
 Beam ProfilersBeam Profilers Catalog
82 pages (5.44 MB )
  Beam CubeBeamstar FX user manual
181 pages (2.04 MB )
  Beam CubeLBA-USB user manual
133 pages (1.09 MB )
  Beam CubeBeamGage User Guide
149 pages (5.24 MB )