CO2, up to 1000W, Laser Profiler Kit

CO2, up to 1000W, Laser Profiler Kit
  • A portable solution for medium power lasers
  • Up to 1000W CO2
  • Up to 31mm beam widths (16mm 1/e2 width)
  • Easy operation - level, set and shoot
description
Specifications
Ordering Info
Catalog/Manual
Download Data Sheet.
The LPK-CO2 Beam Profiler Kits consist of an A/R coated reflecting wedge, CaF2 filters, beam telescope to reduce larger beams, Firewire Pyrocam camera, and LBA software computer and interface card if required. The kit is designed to be conveniently placed in a horizontal beam, or under a down directed beam, to measure raw beam characteristics & stability. The user must safely handle the 95 to 99.5% of the beam that passes through the wedge. A PC style computer is required but not included. See the LBA Software section for software features and calculations. See the table below for specifications
LPK-CO2-16
 
Model Beam Reduction Beam Sizes Wavelength Type of Attenuator Camera
LPK-CO2-6.4-0.5 1X 1.0 - 6.4mm 10.6um 0.5% beam splitter + assorted attenuators Pyrocam III
LPK-CO2-6.4-5.0 1X 1.0 - 6.4mm 10.6um 5% beam splitter + assorted attenuators Pyrocam III
LPK-CO2-16-0.5 3X 3.0 - 16mm 10.6um 0.5% beam splitter + assorted attenuators Pyrocam III
LPK-CO2-16-5.0 3X 3.0 - 16mm 10.6um 5% beam splitter + assorted attenuators Pyrocam III
     ItemDescriptionP/N 
   
  LPK-CO2-6.4-0.5 LBA-PC-PIII software, Pyrocam III with chopper (PY-III-P-B-10.6), LBS-100-IR-0.5 beam splitter/attenuator, base plate, miscellaneous hardware. Suitable for beams 1.0 to 6.4mm.* SP90075 
     
  LPK-CO2-6.4-5.0 LBA-PC-PIII software, Pyrocam III with chopper (PY-III-P-B-10.6), LBS-100-IR-5.0 beam splitter/attenuator, base plate, miscellaneous hardware. Suitable for beams 1.0 to 6.4mm.* SP90076 
     
  LPK-CO2-16-0.5 LBA-PC-PIII software, Pyrocam III with chopper (PY-III-P-B-10.6), LBS-100-IR-0.5 beam splitter/attenuator, 3X telescope, base plate, miscellaneous hardware. Suitable for beams 3.0 to 16mm.* SP90077 
     
 LPK-CO2-16-5.0 LBA-PC-PIII software, Pyrocam III with chopper (PY-III-P-B-10.6), LBS-100-IR-5.0 beam splitter/attenuator, 3X telescope, base plate, miscellaneous hardware. Suitable for beams 3.0 to 16mm.* SP90078 
     
* Maximum beam size assumes zero diffraction from the wings of the beam. Beams of up to 1.5X the maximum size can be applied with minimal diffraction. Beams of up to 2X the above size can be applied, but noticeable diffraction will occur.
 Beam ProfilersBeam Profilers Catalog
82 pages (5.44 MB )
 CO2-LPKCO2 Laser Profile Kit Installation Guide
12 pages (128 KB )