II-VI-CO2 In-Line Beam Monitoring
II-VI-CO2 In-Line Beam Monitoring
  • An in-line industrial laser beam monitoring solution
  • Rapidly tune lasers for best performance for each job
  • Monitor fluctuations while processing
  • Optimize beams in real-time
  • Diagnose faults quickly
Description
Specifications
Ordering Info
Catalog/Manual
Download Data Sheet.
The II-VI-CO2-BS-35 Profiler Beam Sampler was developed by II-VI, a leading industrial optics supplier, specifically to enable measurement and viewing of high power industrial CO2 beams. Spiricon and II-VI have teamed up to provide solutions to vexing laser beam stability, alignment, tuning, and optimizing difficulties.
The II-VI-CO2-58 series Profiler consists of a set of turning mirrors that direct the beam to a sampling beam splitter, and then returns it to the original in-line path. After passing through the splitter, the sampled beam passes through additional attenuation and a beam telescope to size the beam for a Pyrocam III infrared camera. The camera is connected to a PC computer through a Firewire interface. A Basic Image Viewer presents 3D isometric plots, 2D color contour plots and grayscale, among other views. Add LBA-PC-PIII beam analyzer software to access many quantitative analysis, computations and charting functions.
The II-VI-CO2-58 Series Profiler is similar to the BS model but the original beam is not returned "in-line". Both a horizontal and vertical entry model are available.
The Pyrocam II with LBA-PC software must be ordered separately.
 
 
Model Wavelength Power Beam Width Beam Input Cooling
II-VI-CO2-BS-35 10.6um up to 8kW 20mm Vertical or Horizontal Requires external water
II-VI-CO2-58-D8-WC-H 10.6um up to 10kW 29mm Horizontal Requires external water
II-VI-CO2-58-D8-WC-V 10.6um up to 10kW 29mm Vertical Requires external water
     ItemDescriptionP/N 
   
  II-VI-CO2-BS-35 II-VI-CO2 in-line sampler, for 10.6µm beams up to 8 kW. Beam width up 20 mm. Pyrocam III Beam Profiler System required (ordered separately). Recommended model: PY-III-C-A or PY-III-C-B with a Germanium 10.6µm window. LBA-PC-PIII laser beam analyzer software included with Pyrocam system. SP90062  
     
  II-VI-CO2-58-D8-WC-H CO2 laser beam sampler for lasers up to 10kW. Input Clear Aperture is 58mm. Requires cooling water. Horizontal entry. Built-in 8x beam reducer and adapters for Pyrocam III. Order Pyrocam III separately. LBAPC- PIII laser beam analyzer software included with Pyrocam system. SP90160  
     
  II-VI-CO2-58-D8-WC-V Same as above but with Vertical Entry SP90161  
 Beam ProfilersBeam Profilers Catalog
82 pages (5.44 MB )
  Beam CubeII-VI SPIRICON CO2 Industrial Beam Profiler
12 pages (570 KB )
 
   Webmaster   Contact Us   Site Map
Copyright © 2009 Ophir-Spiricon, LLC