20C-UAU | OEM thermal and photodiode sensors | OEM Power Sensors - Ophir

20C-UAU

Consult Ophir Representative

The 20C-UAU is a compact OEM thermal power/energy laser sensor with dimensions only 38x38x14mm. It has a 12mm aperture and measures from 10mW to 4W stand alone and 20W when heat sinked. It can measure energy from 6mJ to 10J. Its broadband coating covers the spectral range from 0.19 to 20µm. It has USB output.

20C-UAU Board | OEM thermal and photodiode sensors | OEM Power Sensors - Ophir
  • Ø12mm
  • 0.19-20µm
  • 10mW-20W
  • 6mJ-10J
  • 38 L x 38 W x 14 D (mm)
  • 23kW/cm² at 20W
  • 0.8 s
  • 0.3 J/cm²
  • 2 J/cm²
  • 20W heat sinked
Need help finding the right sensor? Try our OEM request

Sensor Finder does not find a match for my application. Is there the possibility to create an OEM sensor for my application?

Yes, we have the ability to rapid prototype standard OEM sensors to help with custom applications where an off the shelf sensor does not fill the requirement.

Was this FAQ helpful to you? yes no
Close

What is the dynamic range of OEM sensors?

In general, the dynamic range over a given range, i.e. the ratio of maximum useable power to minimum useable power of Ophir thermal OEM sensors is 40:1. If greater dynamic range is desired, Ophir OEM RS232 sensors are available with several selectable ranges.

Was this FAQ helpful to you? yes no
Close

Do I need to recalibrate my instrument? How often must it be recalibrated?

Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.

Was this FAQ helpful to you? yes no
Close
 
Cooling of OEM Sensors: Heat Sinking Cooling of OEM Sensors: Heat Sinking
OEM Laser Power Meter and Sensor OEM Laser Power Meter and Sensor OEM Laser Power Meter and Sensor

In this video, Jimmy Green, Ophir OEM Specialist, explains how Ophir can solve laser measurement challenges if a solution cannot be found from the hundreds of products in our catalog.

Clarifications: Range selection, measurement duration Clarifications: Range selection, measurement duration Clarifications: Range selection, measurement duration

Sometimes, even experienced users of laser measurement equipment come across some issues that, although basic, need to be clarified. This video reviews 2 such issues.

In this video, you will learn some guidelines for making sure that a sensor has been provided with proper heat sinking so it does not get damaged.