1000W-LP2-34 | Laser Thermal Power Sensors | Power Sensors - Ophir

1000W-LP2-34

7Z02774
 

The 1000W-LP2-34 is a water cooled thermal power/energy laser measurement sensor for high power density and long pulse lasers. It has a 34mm aperture and can measure power from 5W to 1000W and energy from 400mJ to 300J. Its high damage threshold LP2 coating covers the spectral range 0.35 – 2.2µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

  • LP2
  • Ø34mm
  • 0.35-2.2µm
  • 5W-1000W
  • 400mJ-300J
  • N.A.
  • Ø100 W x 35 D (mm)
  • 300J
  • 10kW/cm²
  • 2.5 s
  • 0.1J/cm²
  • 130J/cm²
  • 1000W
Need help finding the right sensor? Try our Sensor Finder
LP2 Laser sensors coating: very high damage threshold, very low reflection LP2 Laser sensors coating: very high damage threshold, very low reflection

Even higher damage threshold…flat spectral response…absorption up to 96%...
These are some of the characteristics of the new “LP2” type laser power sensors from Ophir.
Learn more in this video.

Accessories

Customers that purchase the above items also consider the following items. Ophir-Spiricon meters and sensors include a standard manufacturers warranty for one year. Add a one year Extended Warranty to your meter or sensor, which includes one recalibration.
  • Metric water fittings for all water cooled sensors except 30K-W with quick connection to 10mm plastic tubing. Replaces standard fitting connecting to 3/8" tubing

  • 3m Cable

    3m Cable

    7E01122A

    3m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

  • 5m Cable

    5m Cable

    7E01122B

    5m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

  • 10m Cable

    10m Cable

    7E01122C

    10m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

  • 12m Cable

    12m Cable

    7E01122D

    12m cable to connect sensor to power meter or interface. Order along with sensor to receive this instead of the standard 1.5m cable.

  • SH to BNC Adapter

    SH to BNC Adapter

    7Z11010

    Allows connection of smart sensors to voltage measuring device for measurement of raw voltage output