As of February 2009, StarLab supports the following devices:
- Pulsar
- USBI
- Quasar
- Nova II
- Vega
Note: StarLab 1.11 fully replaces the USBI PC application. As such, USBI PC will no longer be updated.
StarLab - Version 1.11
Released: 15 February 2009
Platforms: Windows 2000 / XP / Vista (32 bit)
| 1. | Download StarLab 1.11 (10.2 MB) |
| 2. | Run the file and follow the on-screen instructions |
| 3. | After installation is completed, StarLab can be run from your computer. |
ActiveX support for Pulsar, USB Interface, Nova-II, and Vega
Besides their use as standalone, fully featured laser power/energy meters, Ophir devices (Pulsar, USB Interface, Nova-II, and Vega) devices can also be used through an ActiveX control. This allows system integrators to integrate Ophir measurement capabilities with legacy analysis packages.
StarLab registers the ActiveX components as part of the installation process of the StarLab application. Registration is also possible via the Options Menu of the StarLab application.
USBI ActiveX Control
Firmware: StarLab operates with the USBI, Pulsar-1, Pulsar-2, Pulsar-4, Vega and Nova-II devices. For latest firmware releases, press here.
SwapINF: to use the Vega, Nova-II and USBI with LabVIEW VI's and with StarLab, press here to download the SwapINF utility
StarLab must be installed with Administrator privileges.
Help with common problems 
Download Firmware Versions: