Compare Model Drawings, CAD & Specs Availability Price
7Z07130
L30A-BB-26-10MM
Thermal Laser Power Sensor, BB Type, 80 mW to 30 W, Ø26 mm, 0.19-11 µm
$1,171
In Stock
In Stock

Specifications

  • Product Name
    L30A-BB-26-10MM
  • Absorber Type
    BB - Broadband general purpose
  • Aperture Size
    Ø26 mm
  • Spectral Range
    0.19-11 µm
  • Minimum Power
    80 mW
  • Maximum Average Power
    Free standing: 8 W
    Heat sinked: 30 W
  • Minimum Pulse Energy
    20 mJ
  • Maximum Pulse Energy
    60 J
  • Response Time
    1.5 s
  • Maximum Average Power Density
    20 kW/cm²
  • Maximum Energy Density <100 ns
    0.3 J/cm²
  • Maximum Energy Density 2 ms
    10 J/cm²
  • Cooling
    Convection / Conduction
  • Dimensions
    Ø75 mm x 10 mm
  • Cable Length
    1.5 m
  • CE Compliance
    Yes
  • UKCA Compliance
    Yes
  • China RoHS Compliance
    Yes

Features

Choosing a Thermal Sensor

In this short “Basics” video we review the use – and selection - of thermal sensors for measuring low, medium and high laser powers.

Sensors for Measuring Laser Power

In this short "Basics" video we review in general how one goes about measuring laser beam power, so that you'll have a clear understanding of what the different sensor types are, and when to use each type.

Thermal Power Sensor Accuracy

Ophir former CTO Dr. Ephraim Greenfield discusses the various factors that contribute to uncertainties in measurement when using Ophir laser power and energy meters.

Effects of Incidence Angle on Measurements

In this video, you will learn to what degree a beam’s incidence angle matters, and for which sensor types this should be taken into account.

Thermal Sensor Calibration

As the spectral sensitivity of the absorber used for the power and energy measurement is not fully linear, Ophir sensors get a high precision calibration by default with more than one wavelength.

Each thermal sensor is calibrated independently of a particular Ophir power meter with its calibration information contained in the DB15 plug. When the sensor is connected to the meter, the meter reads and interprets this information to display a calibrated reading. Each power meter is calibrated independently and has the same sensitivity as an other meter within about 2 tenths of a percent.

Unless otherwise indicated, Ophir sensors and meters should be recalibrated within 18 months after initial purchase, and then once a year after that.

Absorption of different thermal sensor absorber types
Contact Us illustration

Have questions? Require assistance?

Click below to to contact Ophir Photonics and we'll get back with you shortly.

Contact Ophir Photonics