English
日本語
中文
Deutsch
русский
Pyroelektrische Laserenergiesensoren
|
Pyroelektrische Laserenergiesensoren – 0,2µJ bis 10J Die Pyroelektrischen Laserenergiesensoren von Ophir erleichtern dank patentierter Technik die Durchführung genauer und wiederholter Messungen gepulster Laser unter einer Vielzahl von Bedingungen wie z.B. Pulsweiten bis zu 5ms und Pulsfrequenzen bis zu 25KHz. Pyroelektrische Laserenergiesensoren für hohe Energieniveaus – 50µJ bis 40J; Blendenöffnungen bis 95mm Wie Standard Pyroelektrische Laserenergiesensoren, durch den integrierten Diffusor jedoch für Messungen bei hohen Energieniveaus und mittleren Leistungen geeignet. |
Ordering Info
Sensor Catalog
Accessories
Related Items
 |
 Energy sensors pgs. 61-81 (1.44 MB) |
Laser energy sensors including laser pyroelectric type sensors are useful for laser measurement of the energy of pulsed lasers.
| Photo | Name | Features | P/N | ||
 |
Nova PE-C Adapter |
The adapter plugs between the Nova D15 socket and the smart plug of the PE-C sensor to allow the Nova to operate with PE-C series sensors. See PE-C spec sheet for details. | 7Z08272 | ||
 |
Heat Sink |
Heat sink that screws onto rear of PE-C series sensors allowing working at over 50% higher average powers | 7Z08267 | ||
 |
Fiber Adapter |
Fiber Adapter for Pyroelectric sensors | |||
 |
IR Laser Phosphor Glass |
For visualizing spectral region 810-860nm, 900-1100nm and 1500-1600nm |
7F01235A | ||
 |
Shock Absorbing Mounting Post |
Post with rubber encased thread to isolate sensor from vibration and prevent false triggering at low energy levels | 7Z08268 | ||
 |
Beam Splitter |
Beam splitter for PE and Thermal sensors | 7Z17001 | ||
 |
Replacement Window for Beam Splitter |
Replacement Window for Beam splitter | 7F01075 | ||
 |
Scope Adapter |
Plugs between the PE sensor and display | 1Z11012 | ||
|
 PE-C to PE Size Adapter |
Size adapter to allow using the PE-C type sensors in jigs and setups that were originally designed for PE sensors | 7Z08273 | ||
 |
PE Metallic Test Plates |
Damage threshold test plates for metallic coating sensors | PE: 7E06031A BF: 7E06031D |
||
 |
Ferrite Choke | Ferrite Choke to install on sensor cable near sensor to reduce electromagnetic interference in situations of high EMI | 7H04014 |
| Photo | Name | Features | P/N | ||
 |
Vega |
Vega color universal smart sensor display for thermal, pyroelectric and photodiode sensors | 7Z01560 | ||
 |
Nova II |
Nova II universal smart sensor display for thermal, pyroelectric and photodiode sensors | 7Z01550 | ||
 |
Nova |
Nova universal smart sensor display for thermal, pyroelectric and photodiode sensors. For the "Nova PE-C Adapter" allowing the Nova to operate with Pyroelectric PE-C series sensors press here. | 7Z01500 | ||
 |
LaserStar Single Channel |
Laserstar single channel universal smart sensor display for thermal, pyroelectric, photodiode and RP sensors | 7Z01600 | ||
|
LaserStar Dual Channel |
The dual channel model enables user to measure two channels independently, or the ratio or difference between them in real time. | 7Z01601 | ||
 |
Pulsar 4 |
Fast 4 channels Pulsar with external trigger | 7Z01201 | ||
 |
Pulsar 2 |
Same as above but for 2 channels only | 7Z01202 | ||
 |
Pulsar 1 |
Same as above but for single channel | 7Z01203 | ||
 |
USB Interface |
Module to operate one Ophir smart sensor from your PC USB port. Comes with a software. Max rep rate for every pulse- 2KHz | 7Z01200 | ||
 |
Juno |
Compact USB Interface that turns your PC into an Ophir power & energy meter | 7Z01250 | ||
 |
Quasar |
Quasar bluetooth wireless smart sensor to PC interface | 7Z01300 |
Back to All Laser Measurement
Back to All Laser Power Energy Meters